where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

855 views
Technical Discussions
Alexander Kren
Alexander Kren
08:39 May-29-2002
I am looking for people who deal with the testing of polymeric paterials

I am looking for people who deal with the testing of polymeric materials.
I am interesting in investigation polymers and NDT tests of them.
Especially rubbers and composites.
thanks for any help.
aleks.p.k@iaph.bas-net.by





 
 Reply 
 
Richard Kazares
Richard Kazares
09:13 May-29-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Depending on the specifics of your materials and material geometries, our company has recently introduced a low-frequency based UT technology that can be used to inspect multi-layered, internally bonded, thick-section composites and rubber (also rubber-like) materials from a SINGLE SIDE. The system (which we have named TSCOUT - for Thick Section Composite Oblique Ultrasonic Testing) uses either a single set - or an array (up to 4) sensor pairs at specific angles and frequencies designed to optimize UT penetration (and reflection) form normally VERY DIFFICULT to inspect materials - and which (previously) have almost always required dual-sided (through penetration) inspection techniques.

Please contact me directly for more details - if this of interest - since I don't want to sound too much like advertising.

: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.



 
 Reply 
 
Benmedakhene
Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne, France, Joined Jan 2002, 1

Benmedakhene

Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne,
France,
Joined Jan 2002
1
02:28 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Our knowledge is in acoustic emission testing of composite materials.
This type of NDT allows a real follow-up of the damage and failure of the composites structures.
If our activity interests you, do not hesitate to contact us.
Universite de Technologie de Compiègne, in France
Cordially


 
 Reply 
 
Jim Knowles
Jim Knowles
03:04 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.I undertook some ultrasonic inspection work with POLYTEST in Moscow who I believe may be of help.
E-mail:polytest@mtu-net.ru
They have developed inspection methods using ultrasound on PVC and Polythene type plastics.



 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window