where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

854 views
Technical Discussions
Alexander Kren
Alexander Kren
08:39 May-29-2002
I am looking for people who deal with the testing of polymeric paterials

I am looking for people who deal with the testing of polymeric materials.
I am interesting in investigation polymers and NDT tests of them.
Especially rubbers and composites.
thanks for any help.
aleks.p.k@iaph.bas-net.by





 
 Reply 
 
Richard Kazares
Richard Kazares
09:13 May-29-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Depending on the specifics of your materials and material geometries, our company has recently introduced a low-frequency based UT technology that can be used to inspect multi-layered, internally bonded, thick-section composites and rubber (also rubber-like) materials from a SINGLE SIDE. The system (which we have named TSCOUT - for Thick Section Composite Oblique Ultrasonic Testing) uses either a single set - or an array (up to 4) sensor pairs at specific angles and frequencies designed to optimize UT penetration (and reflection) form normally VERY DIFFICULT to inspect materials - and which (previously) have almost always required dual-sided (through penetration) inspection techniques.

Please contact me directly for more details - if this of interest - since I don't want to sound too much like advertising.

: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.



 
 Reply 
 
Benmedakhene
Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne, France, Joined Jan 2002, 1

Benmedakhene

Consultant, Consultant on acoustic emission and composites mat
Universite de Technologie de Compiegne,
France,
Joined Jan 2002
1
02:28 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
Our knowledge is in acoustic emission testing of composite materials.
This type of NDT allows a real follow-up of the damage and failure of the composites structures.
If our activity interests you, do not hesitate to contact us.
Universite de Technologie de Compiègne, in France
Cordially


 
 Reply 
 
Jim Knowles
Jim Knowles
03:04 May-30-2002
Re: I am looking for people who deal with the testing of polymeric paterials
: I am looking for people who deal with the testing of polymeric materials.
: I am interesting in investigation polymers and NDT tests of them.
: Especially rubbers and composites.
: thanks for any help.
: aleks.p.k@iaph.bas-net.by
.
.I undertook some ultrasonic inspection work with POLYTEST in Moscow who I believe may be of help.
E-mail:polytest@mtu-net.ru
They have developed inspection methods using ultrasound on PVC and Polythene type plastics.



 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window