where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
2994 views
Technical Discussions
John Hazel
John Hazel
09:08 Jun-06-2002
Inconel 825 Acoustic longitudinal velocity

I am trying to find the acoustic longitudinal velocity for Inconel 825. there is not much information posted about this alloy. Does any one have any ideas what the velocity is or where I might find it?


    
 
 Reply 
 
Danny Wang
Danny Wang
09:53 Jun-06-2002
Re: Inconel 825 Acoustic longitudinal velocity
: I am trying to find the acoustic longitudinal velocity for Inconel 825. there is not much information posted about this alloy. Does any one have any ideas what the velocity is or where I might find it?
.

John:

Velocity V=D/t Two techniques:
(1)
Find a place with known thickness (t) such as flange.
Using your UT to find the transient time ( delta T). The time from initial pauls to first back wall or the transient time from 1st back wall to 2nd back wall.

V= 2 x thickness/ delta T

(2)
Find a place with known thickness (t) such as flange.
Using your UT, placed a probe on the known thickness area and change the velocity until the first back to the correct thickness.

If you have futher question you can call me at 909-392-5263. or visit my web site at http://www.spectruminspection.org

Danny Wang, PE




    
 
 Reply 
 
Richard Finlayson
Director, Operations
Princeton Instruments, USA, Joined Jun 2000, 8

Richard Finlayson

Director, Operations
Princeton Instruments,
USA,
Joined Jun 2000
8
00:52 Jun-06-2002
Re: Inconel 825 Acoustic longitudinal velocity
: : I am trying to find the acoustic longitudinal velocity for Inconel 825. there is not much information posted about this alloy. Does any one have any ideas what the velocity is or where I might find it?
: .
.
: John:
.
John,

You can find a table of acoustic velocities in Part 2 of the NDT Handbook,UT testing,Volume Seven from ASNT. It shows the longitudinal wave velocity as 5820 m/s for Inconel.

Richard
Major (retired) Richard D. Finlayson
Director, Research, Engineering Applications, Certification,
Training (REACT) and New Business Development
Physical Acoustics Corp.
195 Clarksville Road
Princeton Jct. NJ 08550, USA
Direct Phone: (609)-716-4026
Fax: (609)-716-0706
e-mail: rfinlayson@pacndt.com
web site: www.pacndt.com




    
 
 Reply 
 
M. W. Moyer
M. W. Moyer
01:41 Jun-06-2002
Re: Inconel 825 Acoustic longitudinal velocity
I have the following values for Inconel:
Inconel 600 Inconel
Longitudinal Velocity: 5.915 mm/us 5.820 mm/us
Shear Velocity: 3.078 mm/us 3.020 mm/us
Density: 8.45 gm/cm^3 8.250 gm/cm^3

: I am trying to find the acoustic longitudinal velocity for Inconel 825. there is not much information posted about this alloy. Does any one have any ideas what the velocity is or where I might find it?
.



    
 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window