where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
5254 views
Technical Discussions
Don Bourque
Don Bourque
05:00 Jun-28-2002
7075-T6 Aluminum

I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1282

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1282
08:45 Jun-28-2002
Re: 7075-T6 Aluminum
Don:
Dale Ensminger in his textbook published velocity for this aluminium as:
Long.=6350 m/s and Shear = 3100 m/s
(no surface wave value published).

However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...

Ed


: I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
05:51 Jul-04-2002
Re: 7075-T6 Aluminum
Ed is correct, anisotropy in grains due to manufacturing (rolling, extrusion, etc.) can cause measureable differences in velocity in the different directions w.r.t. the processing. I don't know the numbers for Al 7075 off hand. The temper (the T6) is not really important.

Dave.

: Don:
: Dale Ensminger in his textbook published velocity for this aluminium as:
: Long.=6350 m/s and Shear = 3100 m/s
: (no surface wave value published).
.
: However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...
.
: Ed
.
:
: : I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
: .
.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window