where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
5249 views
Technical Discussions
Don Bourque
Don Bourque
05:00 Jun-28-2002
7075-T6 Aluminum

I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1282

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1282
08:45 Jun-28-2002
Re: 7075-T6 Aluminum
Don:
Dale Ensminger in his textbook published velocity for this aluminium as:
Long.=6350 m/s and Shear = 3100 m/s
(no surface wave value published).

However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...

Ed


: I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
05:51 Jul-04-2002
Re: 7075-T6 Aluminum
Ed is correct, anisotropy in grains due to manufacturing (rolling, extrusion, etc.) can cause measureable differences in velocity in the different directions w.r.t. the processing. I don't know the numbers for Al 7075 off hand. The temper (the T6) is not really important.

Dave.

: Don:
: Dale Ensminger in his textbook published velocity for this aluminium as:
: Long.=6350 m/s and Shear = 3100 m/s
: (no surface wave value published).
.
: However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...
.
: Ed
.
:
: : I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
: .
.



 
 Reply 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window