where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
439 views
Technical Discussions
AxlZ W. AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ W. AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:49 Jul-04-2002
Inspection for a grip of cable stayed bridge.?

How to use NDT method inspect a grip of cable stayed bridge?
In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?

Thank you
AxlZ W. AekZ


 
 Reply 
 
Lou Schillaci
Lou Schillaci
03:31 Jul-04-2002
Re: Inspection for a grip of cable stayed bridge.?
There is a firm in Switzerland that have devised a type of PIG that goes up the cable and measure the magnetic field of the cable.

: How to use NDT method inspect a grip of cable stayed bridge?
: In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?
.
: Thank you
: AxlZ W. AekZ
.



 
 Reply 
 

Product Spotlight

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window