where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.
415 views
Technical Discussions
AxlZ W. AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ W. AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:49 Jul-04-2002
Inspection for a grip of cable stayed bridge.?

How to use NDT method inspect a grip of cable stayed bridge?
In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?

Thank you
AxlZ W. AekZ


 
 Reply 
 
Lou Schillaci
Lou Schillaci
03:31 Jul-04-2002
Re: Inspection for a grip of cable stayed bridge.?
There is a firm in Switzerland that have devised a type of PIG that goes up the cable and measure the magnetic field of the cable.

: How to use NDT method inspect a grip of cable stayed bridge?
: In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?
.
: Thank you
: AxlZ W. AekZ
.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window