where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

477 views
Technical Discussions
AxlZ W. AekZ
R & D
King mongkut's university of technology Thonburi, Thailand, Joined Jun 2001, 16

AxlZ W. AekZ

R & D
King mongkut's university of technology Thonburi,
Thailand,
Joined Jun 2001
16
02:49 Jul-04-2002
Inspection for a grip of cable stayed bridge.?

How to use NDT method inspect a grip of cable stayed bridge?
In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?

Thank you
AxlZ W. AekZ


 
 Reply 
 
Lou Schillaci
Lou Schillaci
03:31 Jul-04-2002
Re: Inspection for a grip of cable stayed bridge.?
There is a firm in Switzerland that have devised a type of PIG that goes up the cable and measure the magnetic field of the cable.

: How to use NDT method inspect a grip of cable stayed bridge?
: In case of cable can't remove out of the grip. Becuase of, a wire rope was held by cast iron with diameter of 200 mm. and , If it is necessary to inspect, what is a criteria?
.
: Thank you
: AxlZ W. AekZ
.



 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window