where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

5758 views
Technical Discussions
Don Bourque
Don Bourque
05:00 Jun-28-2002
7075-T6 Aluminum

I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
08:45 Jun-28-2002
Re: 7075-T6 Aluminum
Don:
Dale Ensminger in his textbook published velocity for this aluminium as:
Long.=6350 m/s and Shear = 3100 m/s
(no surface wave value published).

However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...

Ed


: I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
.



 
 Reply 
 
David Forsyth
R & D
TRI/Austin, USA, Joined Nov 2001, 41

David Forsyth

R & D
TRI/Austin,
USA,
Joined Nov 2001
41
05:51 Jul-04-2002
Re: 7075-T6 Aluminum
Ed is correct, anisotropy in grains due to manufacturing (rolling, extrusion, etc.) can cause measureable differences in velocity in the different directions w.r.t. the processing. I don't know the numbers for Al 7075 off hand. The temper (the T6) is not really important.

Dave.

: Don:
: Dale Ensminger in his textbook published velocity for this aluminium as:
: Long.=6350 m/s and Shear = 3100 m/s
: (no surface wave value published).
.
: However, discussions with Fred Hotchkiss in Panametrics indicated that some aluminiums may have anisotropy to deal with...
.
: Ed
.
:
: : I'm looking for the speed of sound in 7075-T6 Aluminum. I would like to get Shear wave, Longitudinal wave and Surface wave velocities if possible.
: .
.



 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window