where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1587 views
Technical Discussions
Peter Rost
Peter Rost
03:28 Jul-15-2002
tube-to-tubesheet weld scanner

I´m looking for an ultrasonic tube-to-tubesheet weld scanner
or an UT inspection system with remote scanner to inspect tube-to-
tubesheet welds for pores with pores size >0.5 mm and for lack of
fusion. To be inspected are welds with tube excess out of tubesheet
of some mm.


 
 Reply 
 
Charlie Jackson
NDT Inspector
Northern.NDT.services LTD, United Kingdom, Joined Oct 1999, 1

Charlie Jackson

NDT Inspector
Northern.NDT.services LTD,
United Kingdom,
Joined Oct 1999
1
09:52 Jul-16-2002
Re: tube-to-tubesheet weld scanner
: I´m looking for an ultrasonic tube-to-tubesheet weld scanner
: or an UT inspection system with remote scanner to inspect tube-to-
: tubesheet welds for pores with pores size >0.5 mm and for lack of
: fusion. To be inspected are welds with tube excess out of tubesheet
: of some mm.
.
Dear Peter
Some years ago the Force Institute in Broenby Denmark were performing such work, they would be worth a call. Contacts are Hans Ole Olsen or Yens Grassov
Regards Charlie



 
 Reply 
 
Massimo Carminati
Massimo Carminati
06:46 Jul-18-2002
Re: tube-to-tubesheet weld scanner
We have designed and engineered several of this manipulators (manual or motorized)for heat exchangers manufacturers with or without UT system with B and C-Scan presentation according to the Stamicarbon rules.

Feel free to contact me.



 
 Reply 
 
Leif Jeppesen
R & D
FORCE Technology, Denmark, Joined Nov 1998, 6

Leif Jeppesen

R & D
FORCE Technology,
Denmark,
Joined Nov 1998
6
07:56 Jul-18-2002
Re: tube-to-tubesheet weld scanner
: I´m looking for an ultrasonic tube-to-tubesheet weld scanner
: or an UT inspection system with remote scanner to inspect tube-to-
: tubesheet welds for pores with pores size >0.5 mm and for lack of
: fusion. To be inspected are welds with tube excess out of tubesheet
: of some mm.
.
FORCE Technology has developed the AHS-1 scanner for the P-scan System 4 for inspection of tube-to-tube sheet welds. The scanner can inspect up to 3 welds in parallel and the data acquisition is controlled directly from the scanner. Inspection speed is up to 300 welds per hour. For further information please look under brochures at www.p-scan.com


 
 Reply 
 
Randy Plis
Sales, Consultant
AMDATA NDE Technology LLC, USA, Joined Oct 1999, 23

Randy Plis

Sales, Consultant
AMDATA NDE Technology LLC,
USA,
Joined Oct 1999
23
08:40 Jul-22-2002
Re: tube-to-tubesheet weld scanner
We also have a tube-to-sheet scanner as an available accessory for our IntraSpect UT C-Scan imaging systems. Such a scanner has been used to inspect near drums in fossil boilers, as well as reactor and pressurizer penetrations in nuclear applications. Please contact us to provide additional detials.

Best regards,
Randy Plis


 
 Reply 
 
Jeff Kott
Jeff Kott
02:30 Jul-30-2002
Re: tube-to-tubesheet weld scanner
: I´m looking for an ultrasonic tube-to-tubesheet weld scanner
: or an UT inspection system with remote scanner to inspect tube-to-
: tubesheet welds for pores with pores size >0.5 mm and for lack of
: fusion. To be inspected are welds with tube excess out of tubesheet
: of some mm.
.

We have an OmniScan system that is capable of such inspections. You can contact me if you have any further questions.


 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window