where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
6421 views
Technical Discussions
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
05:19 May-16-2004
Authorized Inspector


Can the forum members guide me how to apply for AI certification , OUTSIDE USA.


 
 Reply 
 
vernon ward
vernon ward
05:16 May-17-2004
Re: Authorized Inspector
----------- Start Original Message -----------
:
: Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
------------ End Original Message ------------

Contact John O'Brien at obirc@aol.com

He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.




 
 Reply 
 
NAT
Engineering, Chief Examiner -NDT Manager
SGS EGYPT, Singapore, Joined Jan 2002, 4

NAT

Engineering, Chief Examiner -NDT Manager
SGS EGYPT,
Singapore,
Joined Jan 2002
4
09:21 May-30-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: :
: : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: Contact John O'Brien at obirc@aol.com
: He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.

Thank you for the information
------------ End Original Message ------------




 
 Reply 
 
llpcode
NDT Inspector
Shaw Group, USA, Joined Jan 2004, 3

llpcode

NDT Inspector
Shaw Group,
USA,
Joined Jan 2004
3
03:18 Jun-08-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : :
: : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : Contact John O'Brien at obirc@aol.com
: : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: Thank you for the information
------------ End Original Message ------------

Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.

You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.

Better to contact the National Board at 614-888-8320 and get clear information.


 
 Reply 
 
NAT
NAT
06:20 Jun-14-2004
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------
Gentle men
Thanks for the info, NB did confirm that only AIA,Juridiction, user/owner can apply for examination.
Any AIAs interested in a volunteer who want to become an AI ?




 
 Reply 
 
Omar Kiptui
Omar Kiptui
02:45 Jun-14-2005
Re: Authorized Inspector
----------- Start Original Message -----------
: : : :
: : : : Can the forum members guide me how to apply for AI certification , OUTSIDE USA.
: : : Contact John O'Brien at obirc@aol.com
: : : He holds very informative training courses on API 510, API 653 and API 570 outside the USA. He can tell you all you need to know.
: : Thank you for the information
: Actually, an ASME Authorized Inspector is different than an Inspector certified under API provisions.
: You would need to be in the employment of an ASME Authorized Inspection Agency or a Juridiction to be able to take the NAtional Board examination.
: Better to contact the National Board at 614-888-8320 and get clear information.
------------ End Original Message ------------


You do not need to be in the employ of anyone to take the National Board Commission test. I just took it and passed, and have no job right now. You have to be in the employ of an AIA to get a commission, but you have 3 years after passing the testto do that.


 
 Reply 
 
murugesan
murugesan
08:00 Aug-20-2012
Re: Authorized Inspector
In Reply to Omar Kiptui at 02:45 Jun-14-2005 .

Sir

I just read your forum message that you took AI exam without being employed by an AIA or jurisdiction.

Did you find it easier to get a job after securing passing grade in AI exam.

I am also planning to take up the AI exam, but i am not employed by AIA or jurisdiction.

Please provide your input about how to prepare for the exam.

 
 Reply 
 
Danfer De la Cruz
Engineering
Peru, Joined Jun 2009, 11

Danfer De la Cruz

Engineering
Peru,
Joined Jun 2009
11
17:59 Aug-20-2012
Re: Authorized Inspector
In Reply to murugesan at 08:00 Aug-20-2012 .

Dear Sir.

I´m AI-ASME, API510, API653 and CWI.
You shall be attending 15 days a course in columbus-ohio before of test.
You shall be studing ASME seccion VIII, IX, I, IV , V, B31.1 and National Board.
Good Luck

 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window