where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1043 views
Technical Discussions
Andreas Bugge
Andreas Bugge
01:31 Jul-01-2002
Real time monitoring of aircraft structures

I am a Norwegian student of Mechanical Engineering having a summer internship in Germany.

Doing literature research on the topic; "in-service/real time crack growth monitoring of aircraft aluminum structures", I would like to know where to start.

Do anyone know specific literature on the topic? I have searched the NDT.net database and found several articles, but none specifically addressing this problem.

Another question is which methods that are suitable for this kind of monitoring. Is acoustic emission, eddy current, ultrasonic testing, or vibrothermography more promising?

Hope that somone can help me.

Thanks!
Andreas Bugge



 
 Reply 
 
Jens Forker
Jens Forker
02:02 Jul-01-2002
Re: Real time monitoring of aircraft structures
A very good starting point for literature search regarding acoustic emission (AE) is certainly the 'Journal of AE', published by Professor Kanji Ono, UCLA (ono@seas.ucla.edu).

Further AE is a very promising technique, as it allows one to monitor a quite large volume with only 1 sensor without the need for scanning. We helped a company doing health monitoring of a re-entry vehicle.

For more details on AE see our website and contact us directly.

Regards
Jens Forker

: I am a Norwegian student of Mechanical Engineering having a summer internship in Germany.
.
: Doing literature research on the topic; "in-service/real time crack growth monitoring of aircraft aluminum structures", I would like to know where to start.
.
: Do anyone know specific literature on the topic? I have searched the NDT.net database and found several articles, but none specifically addressing this problem.
.
: Another question is which methods that are suitable for this kind of monitoring. Is acoustic emission,eddy current, ultrasonic testing, or vibrothermography more promising?
.
: Hope that somone can help me.
.
: Thanks!
: Andreas Bugge
.



 
 Reply 
 
Jeff Kott
Jeff Kott
02:42 Jul-30-2002
Re: Real time monitoring of aircraft structures
: I am a Norwegian student of Mechanical Engineering having a summer internship in Germany.
.
: Doing literature research on the topic; "in-service/real time crack growth monitoring of aircraft aluminum structures", I would like to know where to start.
.
: Do anyone know specific literature on the topic? I have searched the NDT.net database and found several articles, but none specifically addressing this problem.
.
: Another question is which methods that are suitable for this kind of monitoring. Is acoustic emission, eddy current, ultrasonic testing, or vibrothermography more promising?
.
: Hope that somone can help me.
.
: Thanks!
: Andreas Bugge
.
Andreas,

Acoustic emmision is great for detecting real-time crack growth. AE will only detect the fact that it is actually cracking but will be unable to measure the length or depth of the cracks. Eddy current and Ultrasonic techniques are utilized for this. Feel free to contact me if you have any further questions.


 
 Reply 
 
Robert Paynter
Robert Paynter
00:41 Jul-30-2002
Re: Real time monitoring of aircraft structures
: I am a Norwegian student of Mechanical Engineering having a summer internship in Germany.
.
: Doing literature research on the topic; "in-service/real time crack growth monitoring of aircraft aluminum structures", I would like to know where to start.
.
: Do anyone know specific literature on the topic? I have searched the NDT.net database and found several articles, but none specifically addressing this problem.
.
: Another question is which methods that are suitable for this kind of monitoring. Is acoustic emission, eddy current, ultrasonic testing, or vibrothermography more promising?
.
: Hope that somone can help me.
.
: Thanks!
: Andreas Bugge

A UK source: I suggest you look out for the "Structural Integrity and Damage Assessment Network". Which was an alliance of researchers in the UK. One of the meetings I attended was hosted by DERA at Farnborough and a focus was aircraft applications.
The Website (www.sidanet.org) - minutes of that meeting: http://www.shef.ac.uk/mecheng/sida/html/min_8.htm
maybe Gareth Pierce's Lamb Wave Technique is one to try.

Robert


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 281

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
281
07:35 Jul-30-2002
Re: Real time monitoring of aircraft structures
You may find something useful in the aerospace journals or possibly look up references including NASA, SAAB, Airbus etc.

Acoustic Emission has been used for real time localised crack monitoring in flight on some of the high performance fighter aircraft.

The technique is used extensively during design certification, qualification on aircraft and components. AE has also been utilised extensively by some Military Operators for operational re-certification of old aircraft by pressurising the fuselage and monitoring for AE activity.

AE works particular well on detecting damage in carbon fibre composite materials now common in aircraft and space vehicle systems.


 
 Reply 
 

Product Spotlight

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window