where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
743 views
Technical Discussions
Erika
Erika
01:47 Jan-09-2002
ACFM

I am currently in NDI and am seeking certification in ACFM.
Does anyone have any input on the best place to obtain this?
Thanks!


 
 Reply 
 
Guido Crapels
Guido Crapels
01:52 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
__________________________
We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
http://www.tscuk.demon.co.uk/tschome.htm


 
 Reply 
 
Martin Lugg
Consultant,
TSC Inspection Systems, United Kingdom, Joined Nov 2000, 27

Martin Lugg

Consultant,
TSC Inspection Systems,
United Kingdom,
Joined Nov 2000
27
02:35 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
.
Training courses leading to operator certification are available from the UK Welding Institute (TWI). These are routinely run in Middlesbrough, UK, but can also be run overseas if there is sufficient demand.

Please contact Jim Sheppard at TWI North:
JSheppard@twi.co.uk
Tel: +44 1642 210512



 
 Reply 
 
Joel Light
Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc., USA, Joined Jul 2002, 12

Joel Light

Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc.,
USA,
Joined Jul 2002
12
03:23 Jul-31-2002
Re: ACFM
: : I am currently in NDI and am seeking certification in ACFM.
: : Does anyone have any input on the best place to obtain this?
: : Thanks!
: __________________________
: We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
: http://www.tscuk.demon.co.uk/tschome.htm
.
___________________________________________
There is a NDT Training center in Houston, TX that offers ACFM Certification courses.
Hellier Training Institute.
Not sure if this is still the correct phone number but try (281) 873-0980



 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window