where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

560 views
Technical Discussions
S S Ananthan
S S Ananthan
03:10 Aug-02-2002
NDT of Electron beam welded Aluminum

Hello,

We are doing a lot of elctron beam welding of alumimium plates in the order of 80 - 100 mmm thickness
Currently we are taking radiography. CAn we use ASME Sec V for the procedures and guidelines ? Are there any other stds for this ?

What about UT ? What should be the suitable technique for this ? and what should be the reference ?

Any ideas ?

Thanks

S S annathan


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
06:37 Aug-02-2002
Re: NDT of Electron beam welded Aluminum
Hello,

Which Specification are you presently using? Does it allow alternative NDT Methods like UT? What are the typical defects produced by the process? Have you carried out that analysis or not?

If interested, pl. correspond directly.

S.V.Swamy,
Manager, QA-MI & NDT Development
Nuclear Fuel Complex,
Hyderabad - 500 062.


: Hello,
.
: We are doing a lot of elctron beam welding of alumimium plates in the order of 80 - 100 mmm thickness
: Currently we are taking radiography. CAn we use ASME Sec V for the procedures and guidelines ? Are there any other stds for this ?
.
: What about UT ? What should be the suitable technique for this ? and what should be the reference ?
.
: Any ideas ?
.
: Thanks
.
: S S annathan
.



 
 Reply 
 

Product Spotlight

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window