where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1056 views
Technical Discussions
Jose Rios
Jose Rios
07:50 Nov-10-1998
bimorph bender transducer

Dear experts,

to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

Thanks in advance.





 
 Reply 
 
Afshin Madinei
Afshin Madinei
09:13 Dec-23-1998
Re: bimorph bender transducer
: Dear experts,

: to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: Thanks in advance.





 
 Reply 
 
M. Simon
M. Simon
01:12 Feb-19-1999
Re: bimorph bender transducer



 
 Reply 
 
Rainer Meier
R & D
retired from intelligeNDT Systems & Services, Germany, Joined Nov 1998, 15

Rainer Meier

R & D
retired from intelligeNDT Systems & Services,
Germany,
Joined Nov 1998
15
01:05 Feb-26-1999
Re: bimorph bender transducer
: Dear experts,

: to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: Thanks in advance.


The properties of bender widely vary depending on the design (monomorph, bimorph, trimorph), driving
conditions and PZT material. Basic relations for example are given in the company paper
"Piecoelectric Ceramics", Philips Components, Eindhoven, The Netherlands (1991). A paper covering
the topic with 95 citations: Jan G. Smits et al., Sensors and Actuators A, 28 (1991) pp. 41 - 61.

Rainer Meier
on behalf of
Dr. Karl Lubitz
E-mail: Karl.Lubitz@mchp.siemens.de



 
 Reply 
 
k.rochdi
k.rochdi
03:08 Mar-16-1999
Re: bimorph bender transducer
: : Dear experts,

: : to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: : My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: : I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: : Thanks in advance.

:
: The properties of bender widely vary depending on the design (monomorph, bimorph, trimorph), driving
: conditions and PZT material. Basic relations for example are given in the company paper
: "Piecoelectric Ceramics", Philips Components, Eindhoven, The Netherlands (1991). A paper covering
: the topic with 95 citations: Jan G. Smits et al., Sensors and Actuators A, 28 (1991) pp. 41 - 61.

: Rainer Meier
: on behalf of
: Dr. Karl Lubitz
: E-mail: Karl.Lubitz@mchp.siemens.de




 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window