where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1055 views
Technical Discussions
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
00:47 Mar-29-1999
Penetrant Test of vessel under pressure

A vessel is under Helium pressure at 100 PSI for the purpose of performing a Helium Leak test.
A tiny Inconel weld on the vessel needs to be PT inspected but was not done prior to pressurizing.
What effect will this have on the penetrant test?


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
09:45 Aug-16-2002
Re: Penetrant Test of vessel under pressure
Pressurisation of the vessel will have a tendency to slightly expand the vessel, thus there will be a tensile stress on the outer surface. This will slightly magnify the size of any discontinuity that may be present. So, the best course is to 'retest' the same weld after the pressure test is completed and the internal pressure removed, before attempting to 'size' the discontinuity and apply the specification for acceptance and or repair.

: : A vessel is under Helium pressure at 100 PSI for the purpose of performing a Helium Leak test.
: : A tiny Inconel weld on the vessel needs to be PT inspected but was not done prior to pressurizing.
: : What effect will this have on the penetrant test?
: ..
.



 
 Reply 
 
rodney fordham
rodney fordham
03:55 Aug-16-2002
Re: Penetrant Test of vessel under pressure
:A partial thickness crack on the outside of a pressure vessel wall opens slightly when the internal pressure is applied. The more sensitive interferometric techniques reveal that the vessel bulges a little in the vicinity of the crack. Does anyone know what the relative importance of internal and external partial thickness cracks is? Clearly the external cracks are more weakening than internal?
====================
: Pressurisation of the vessel will have a tendency to slightly expand the vessel, thus there will be a tensile stress on the outer surface. This will slightly magnify the size of any discontinuity that may be present. So, the best course is to 'retest' the same weld after the pressure test is completed and the internal pressure removed, before attempting to 'size' the discontinuity and apply the specification for acceptance and or repair.
.
: : : A vessel is under Helium pressure at 100 PSI for the purpose of performing a Helium Leak test.
: : : A tiny Inconel weld on the vesselneeds to be PT inspected but was not done prior to pressurizing.
: : : What effect will this have on the penetrant test?
: : ..
: .
.



 
 Reply 
 
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
05:36 Aug-19-2002
Re: Penetrant Test of vessel under pressure
Pressure inside a vessel especially (helium)will inhibit the capillary action of the penetrant in entering leaks. The thru wall leak may not be detected with the penetrant test.
Furthermore, penetrant could also plug a tiny leak and make it undetectable with the helium test.

This information comes from a recent experience of a vessel similar to the one described.
For more information e mail me directly.


: :A partial thickness crack on the outside of a pressure vessel wall opens slightly when the internal pressure is applied. The more sensitive interferometric techniques reveal that the vessel bulges a little in the vicinity of the crack. Does anyone know what the relative importance of internal and external partial thickness cracks is? Clearly the external cracks are more weakening than internal?
: ====================
: : Pressurisation of the vessel will have a tendency to slightly expand the vessel, thus there will be a tensile stress on the outer surface. This will slightly magnify the size of any discontinuity that may be present. So, the best course is to 'retest' the same weld after the pressure test is completed and the internal pressure removed, before attempting to 'size' the discontinuity and apply the specification for acceptance and or repair.
: .
: : : : A vessel is under Helium pressure at 100 PSI for the purpose of performing a Helium Leak test.
: : : : A tiny Inconel weld on the vessel needs to be PT inspected but was not done prior to pressurizing.
: : : : What effect will this have on the penetrant test?
: : : ..
: : .
: .
.



 
 Reply 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window