where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

11634 views
Technical Discussions
Zeki Cosku Gokce
Zeki Cosku Gokce
07:29 Oct-18-2003
Selenium-75 Gamma Radiography Sources

Does anyone have any experience with Selenium-75 Gamma Radiography Sources,
inspecting pipelines and pipework?



 
 Reply 
 
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 252

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
252
08:48 Nov-11-2003
Re: Selenium-75 Gamma Radiography Sources
Yes. I have used SE 75 for RT of ASME Code work.

What is your specific question?


 
 Reply 
 
Zeki Cosku Gokce
Zeki Cosku Gokce
04:04 Nov-18-2003
Re: Selenium-75 Gamma Radiography Sources
My question will be how it is different then IR 192 as far as the film and exposure times are concerned.
I have read some articles and they talk about special type of film and also talk about longer exposure times. Is that the case?
----------- Start Original Message -----------
: Yes. I have used SE 75 for RT of ASME Code work.
: What is your specific question?
------------ End Original Message ------------




 
 Reply 
 
Jason D. Shepard
Jason D. Shepard
08:21 Feb-17-2005
Re: Selenium-75 Gamma Radiography Sources
----------- Start Original Message -----------
: Yes. I have used SE 75 for RT of ASME Code work.
: What is your specific question?
------------ End Original Message ------------
How does Selenium compare to Ir-192 as far as strength and penetarting power? Can it be used for concrete RT like Irirdium? We use Iridium for up to 10 inches of concrete, can we do the same with Selenium? If so, what would our shot times be like?
Thank you




 
 Reply 
 
WiJay Heinemann
WiJay Heinemann
01:25 Oct-05-2005
Re: Selenium-75 Gamma Radiography Sources
----------- Start Original Message -----------
: : Yes. I have used SE 75 for RT of ASME Code work.
: : What is your specific question?
: How does Selenium compare to Ir-192 as far as strength and penetarting power? Can it be used for concrete RT like Irirdium? We use Iridium for up to 10 inches of concrete, can we do the same with Selenium? If so, what would our shot times be like?
: Thank you
------------ End Original Message ------------

NO!!!



 
 Reply 
 
WiJay Heinemann
WiJay Heinemann
01:33 Oct-05-2005
Re: Selenium-75 Gamma Radiography Sources
----------- Start Original Message -----------
: My question will be how it is different then IR 192 as far as the film and exposure times are concerned.
: I have read some articles and they talk about special type of film and also talk about longer exposure times. Is that the case?
: : Yes. I have used SE 75 for RT of ASME Code work.
: : What is your specific question?
------------ End Original Message ------------

I have used Se75 every day for the last 2 years, the shot times are "roughtly" 3 times longer per specific currie strength when compared to Ir192. That is the only down side I see. The images are comparabule to X-Ray, the 2mr boundry for an unshielded Se75 100ci source is 331.70' vs. 543.10 for Ir192. This makes it easy to work around or with other people near your area of work. The other down side to this is the Kv range. It is nearly imposibul to shoot any large bor pipe, or heavy wall (sc. 160 and up). Se75 is a great companion to the Ir192 on a job where a veriety of pipe sizes and wall thickness exist.


 
 Reply 
 
Chuck Davis
Chuck Davis
04:36 Nov-02-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Dent McIntyre at 08:48 Nov-11-2003 .

Does anyone know how much a Selenium camera complete with all accesories costs in North America (Canada or US)? Also sources for 70 curies.

I am the owner of an NDT company in Mexico and am having extreme difficulty getting quotes on anything anywhere here. If anybody up north knows dealers of selenium cameras and sources who could forward me the info it would be much appreciated.

 
 Reply 
 
Chuck Davis
Chuck Davis
04:37 Nov-02-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Dent McIntyre at 08:48 Nov-11-2003 .

Does anyone know how much a Selenium camera complete with all accesories costs in North America (Canada or US)? Also sources for 70 curies.

I am the owner of an NDT company in Mexico and am having extreme difficulty getting quotes on anything anywhere here. If anybody up north knows dealers of selenium cameras and sources who could forward me the info it would be much appreciated.

 
 Reply 
 
Chuck Davis
Chuck Davis
04:37 Nov-02-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Dent McIntyre at 08:48 Nov-11-2003 .

Does anyone know how much a Selenium camera complete with all accesories costs in North America (Canada or US)? Also sources for 70 curies.

I am the owner of an NDT company in Mexico and am having extreme difficulty getting quotes on anything anywhere here. If anybody up north knows dealers of selenium cameras and sources who could forward me the info it would be much appreciated.

 
 Reply 
 
collin maloney
NDT Inspector, - Plant Inspector
Applus RTD, Australia, Joined Nov 2000, 147

collin maloney

NDT Inspector, - Plant Inspector
Applus RTD,
Australia,
Joined Nov 2000
147
05:39 Nov-02-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Chuck Davis at 04:37 Nov-02-2012 .

Chuck
no special camera required unless your planning on "scar" type radiography. Your usual source supplier should be able to get a price. We get ours from South Africa

 
 Reply 
 
Jignesh
Jignesh
07:36 Nov-02-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to WiJay Heinemann at 01:33 Oct-05-2005 .

The Rontgen Per Hour Per Meter (RHM) of Se-75 = 0.203, Ir -192 = 0.48 & Co-60 = 1.33, hence Ce-75 is soft radioactive material and required high penetration power & exposure time.

I wish to have any comparision sheet for Ce-75 & Xray, if some body have.

 
 Reply 
 
Csaba Hollo
,
Retired, Canada, Joined Feb 2010, 301

Csaba Hollo

,
Retired,
Canada,
Joined Feb 2010
301
23:13 Nov-05-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Chuck Davis at 04:37 Nov-02-2012 .

Google 'QSA Global'

They have everything you need and are able to export to Mexico.

The prices they quote me may be different from the prices they quote you, so I will refrain from doing so.

 
 Reply 
 
Alessio Restolfer
NDT Inspector,
D.e M.I. srl, Italy, Joined Aug 2011, 1

Alessio Restolfer

NDT Inspector,
D.e M.I. srl,
Italy,
Joined Aug 2011
1
12:35 Nov-08-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Zeki Cosku Gokce at 04:04 Nov-18-2003 .

For exposure time equal to 'Ir182 enough to calculate the 30% increase in thickness examination and 15% more on time .. in our company we use very often SE75 and we are very comfortable with this method.

Best Regards Alessio.

 
 Reply 
 
vimalkumar
vimalkumar
06:59 Dec-16-2012
Re: Selenium-75 Gamma Radiography Sources
In Reply to Zeki Cosku Gokce at 07:29 Oct-18-2003 (Opening).

yes I have used in abhu dhabi uae

 
 Reply 
 
Bipul Das
Bipul Das
18:07 Sep-02-2018
Re: Selenium-75 Gamma Radiography Sources
In Reply to WiJay Heinemann at 01:33 Oct-05-2005 .

below 8mm thik pipe is xray and above 8mm thik is gumma who is the asme coad

 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window