where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Come & join the membership of NDTSS, Gain access to international developments.
477 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 616

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
616
00:53 Nov-17-1998
Ultrasonic Testing of Butt Fusion Welded Polyethylene Pipes

In 1997 and 1998 we had some Forum topics on ultrasonic testing of butt fusion welded polyethylene pipes. Jeff Phillips followed up this matter and I am appreciate very much his contribution I received with his email message:

Jeff Phillips wrote:
As from early next month, my email address and web address at Deakin University will be removed from the university servers, due to a change in policy for undergraduate students.

I have attached a file to this email that lists references related to the UT of PE Butt welds. I believe this list should reside somewhere on ndt.net. (See at http://www.ndt.net/publicat/bibliog/utpepipe.htm)

I consider that these references may be useful to others that have an interest in this subject. In particular the GRI Reports, TWI Reports, Krautkramer references and the Journal of Applied Physics articles provide some very good information on this subject.

The assistance of you and many others, certainly helped me uncover many references that I would not normally havefound.

Thank you for your assistance.

Regards,
Jeff

Jeff Phillips - Off Campus Student
Deakin University - Australia
Home Address: 68 Merrett Drive - Williamstown - Victoria - Australia 3016
Home Phone: 61 3 93978615
Email: jeffreyp@deakin.edu.au
WWW: http://www.deakin.edu.au/~jeffreyp



 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window