where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

559 views
Technical Discussions
ozan yurdugül
ozan yurdugül
05:51 Nov-24-1998
looking for a job

I'm a naval architect and UT 1 operator. I can work in a thickness measurement company.
If you interest, send me e-mail.
Best regards.


 
 Reply 
 
RAJESH TRIVEDI
RAJESH TRIVEDI
07:47 Feb-01-1999
Re: looking for a job
DEAR SIR,
I AM SEEKING FOR NDT JOB EITHER IN AIRLINES/
INDUSTRY.I AM GRADUATE IN AERONAUTICAL ENGG.I HAVE ALSO
PASSED ASNT LEVEL-2 IN UT,MT,PT AS PER SNT-TC-1A.
I HAVE A PASSED TOTAL QUALITY MANAGEMENT&ISO 9000.
I HAVE 3YEARS EXPERIENCE IN THE FIELD OF NDT.



 
 Reply 
 
sam soo kang
sam soo kang
00:02 Jan-19-2000
Re: looking for a job
: I'm a naval architect and UT 1 operator. I can work in a thickness measurement company.
: If you interest, send me e-mail.
: Best regards.




 
 Reply 
 
sandip ghadge
sandip ghadge
03:07 Mar-23-2001
Re: looking for a job
: DEAR SIR,
: I have passed Aeronautical Engg. and I am looking for job. So send me job prospects.
kindly look my appplication.

Yours Sincerely
s ghadge


 
 Reply 
 
Larry Smithe
Larry Smithe
08:55 Jul-16-2001
Architect Jobs and Work at Home

These message boards have been a huge help to me in the past, so it would be honest of me to post something on this message board to help someone else along that has happened to see this message. I found two great sites related to home work (engineering, architect, translators, typing jobs, etc) at www.homeworkers.org and www.homeworkers.com . This is a great place to start your search for any "at home jobs". From those great sites i found www.telecommuting-jobs.org and www.intlhomeworkers.com where you will find web design data entry, secretarial, word processing, desktop publishing, medical transcription, proofreading and translating jobs. Each site has free trial membership!

From, Larry Smithe
larrysmithe2001@yahoo.ca



 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window