where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1664 views
Technical Discussions
Jhon Possu
Jhon Possu
00:20 Mar-03-2001
Ultrasound Portable System

I am looking for a ultrasound portable system, battery operated like a notebook that includes a pulser/receiver card, a A/D card and a D/A card. Additionally I want to write my own software using visual basic, labview or visual c++.

For your answer, thank you very much...


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
01:08 Mar-05-2001
Re: Ultrasound Portable System
: I am looking for a ultrasound portable system, battery operated like a notebook that includes a pulser/receiver card, a A/D card and a D/A card. Additionally I want to write my own software using visual basic, labview or visual c++.
.
: For your answer, thank you very much...
.
We can offer you something, that can be probably interesting for you. See please the following information:
http://www.optel.com.pl/manual/english/opbox.htm concerning OPBOX, portable UT-unit, that works with any
computer with parallel printer (Centronics) interface.

Wieslaw Bicz



 
 Reply 
 
Wolfgang Bisle
Wolfgang Bisle
06:06 Mar-06-2001
Re: Ultrasound Portable System
It should not be that problem to find a suitable system for you. There are a lot of companies on the market offering now portable systems. Without any phantasy you may just look a the homepage of Krautkrämer and you will find Just what you want. Notebook with small sidebox. (http://www.krautkramer.com/products/flawgroup/uslt2000/describe.htm). That's a link everybody would look first. but there are a lot of other vendors.
Maybe you should think a little bigger: a shoebox PC with slotcards: One pulser/receiver card, another cord is a 12Bit/100MSample digitizer, a third card can operate a stepper motor unit, or the third card decodes Encoders for manual inspection manipulators etc.
Look for instance at Dr. Hillger's homepage http://www.dr-hillger.de/
Just what you need.
Such a shoebox computer is used by us here at EADS in Bremen for a lot of NDT applications:
Shearography
Pulse-Thermography
Ultrasound
Porositychecking
Eddy Current Multy Frequency
etc.
Some time ago we used the KONTRON IPlite Laptop, a good and rigid system, but it turned out that im most cases it is too expensive compared to other systems -you don't need always a "Mercedes"
Maybe it is a good idea to look for suitable slotcards fulfilling your needs; look for good software drivers added to the cards and assemble your own system. Use for instance a software surface like LabView or Labwindows and you may save a lot of time.
If you look for suitable digitizers (like GAGE, AQUIRIS, SONIXS, Signatec...) which are well approved for Ultrasonic applications, you will mostly find a good library of routines, sometimes there is already a lot of work done for your application. More care has to be taken to find out a good pulser/receiver. I will not tell you the company: but some years ago we ordered a Pulser/Receiver-PC-card from a well known american company which was reputated by a lot of people from the US academic world as a reference system. We instead got very lousy results compared with an oldfashioned Krautkramer USIP12 (thats really a good reference). This PC-Card produced unstable pulses, bad triggering, lots of noise - nothing usefull for signal analysis.
So be careful, what you buy. You schould test it in comparison to a good old analog equipment (e.g. like the USIP 12 - it's still challenge)
And a last advice: Battery Power causes not very much pleasure, if you use a notebook system. Notebooks are themselves consuming a lot of power and driving additionally a complete inspection system reduces the time of operation once more - average usage time for battery driven notebooks in full operation is about 2 hours; if you add more power consuming electronics - and you have to drive your transducers with power - then this time will drastically go down: what for. If you have to be mobile, use systems designed for portability like USL52 or similar.


 
 Reply 
 
Doug Jensen
Doug Jensen
01:10 Aug-21-2001
Re: Ultrasound Portable System
jhon,
If you are still looking you ought to check out SonoSite. (www.sonosite.com) They seem to have exactly what you are asking for, although I'm not sure about the coding element you are asking about. It seems most companies have some sort of "proprietary" software element.


 
 Reply 
 
Bob Giblett
Bob Giblett
03:15 Oct-24-2002
Re: Ultrasound Portable System
We have just introduce a Notebook PC docking station that accepts 1 or 3 full length PCI boards, which may be of interest.

Regards

Bob Giblett


 
 Reply 
 
James JOE
Sales
South Korea, Joined Sep 2002, 9

James JOE

Sales
South Korea,
Joined Sep 2002
9
04:20 Oct-24-2002
Re: Ultrasound Portable System
: We have just introduce a Notebook PC docking station that accepts 1 or 3 full length PCI boards, which may be of interest.
.
: Regards
.
: Bob Giblett
.
Would you please send us information more in details as soon as possible?



 
 Reply 
 
Richard Kazares
Richard Kazares
04:28 Oct-24-2002
Re: Ultrasound Portable System
Interesting comments on this topic.

FINALLY, notebook PC's with small, lightweight USB 2 or PCMCIA based add-on chassis are available with either AC or battery pack power (you CAN add a relatively light-weight battery pack and extend battery life to well over 8 hours).

We (NDT Automation) have introduced such a system (with PCMCIA interface) using our own 12 bit 100 MHZ; 400 V Integrated A/D and P/R card and PCI-based motor controller/encoder interface board.

This system can operate both with our own software (ULtraWin) - or with Labview or other software drivers and systems.

There are still "lunchbox" based (and other PC form factors) solutions also available - with the same capabilities - so now it is a matter of personal CHOICE as to which way to go.

The notebook solution is rather attractive - since the notebook itself WITH whatever data is collected during a test/inspection can also easily be used as the post processing analysis and reporting "tool" - without the bulk of the remainder of the system.

: I am looking for a ultrasound portable system, battery operated like a notebook that includes a pulser/receiver card, a A/D card and a D/A card. Additionally I want to write my own software using visual basic, labview or visual c++.
.
: For your answer, thank you very much...
.



 
 Reply 
 
GÖRAN VOGT
Director,
Vogt Ultrasonics GmbH, Germany, Joined Nov 1998, 4

GÖRAN VOGT

Director,
Vogt Ultrasonics GmbH,
Germany,
Joined Nov 1998
4
04:34 Oct-24-2002
Re: Ultrasound Portable System
DearSirs,

we are very interested in your docking station for adapting PCI boards to a notebook. Please sent information, if possible till tomorrow evening for a meeting.

Thanks

Göran Vogt
Vogt Werkstoffprüfsysteme GmbH
Burgwedel
tel 0049-(0)5139-9815-12
fax 0049-(0) 5139-9815-99


: We have just introduce a Notebook PC docking station that accepts 1 or 3 full length PCI boards, which may be of interest.
.
: Regards
.
: Bob Giblett
.



 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window