where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
278 views
Technical Discussions
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
08:15 Oct-26-2002
Protocol for Measurement of POD?

A member of the nde.net forum wrote to me by email:

Interesting to read your comments on POD over the years on the net. Do you have such a thing as an IDIOTS guide (PROTOCOL), on how you feel is the best way to conduct a POD exercise.

I responsed:

Thanks for the interesting question.

There is a situation in which a protocol used frequently in science is available. The situation is that a partition of the material that is inspected by a test, "Partition A," is defined and is fixed as a property of this test. The purpose of the test is to measure the value of one or more properties of each element of this partition. A test is referenced that establishes the true value of each measured property, "Ground Truth".

Partition A forms a legitimate, statistical population for purposes of measuring the reliability of the test. Now, define a partition of the values of one of the measured properties into two parts, "partition B". Define one of these parts as "positive" and the other as "negative". All of the permutations of measured and true values can be now represented by events conventionally termed "true negative," "false negative," "true positive," "false positive," Estimate the false positive and false negative error probabilities by post inspection random sampling in the population, followed by establishment of the ground truth in the sample.

This protocol is inconsistent with your desire to estimate the POD. What you might be able to do is adopt this protocol and use it to measure a property that contains nearly the same information as the POD.

For example, if it is possible to place the boundaries between the elements of Partition A in places where it is extremely unlikely for a flaw to cross a boundary, a probability that captures similar information can be estimated for a test that measures the size of the largest flaw in each element of Partition A; sizes above "z" reside in one of the two elements of Partition B and the remaining sizes reside in the other element. With "positive" defined as values at or above z and z set at a "relatively low value," the probability of a true positive contains information that would be almost identical to the information in the POD, for many purposes; by "relatively low value," I mean a value that is a bit below the value at which the largest flaw becomes capable of propagating to failure.




 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window