where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
541 views
Technical Discussions
Edward Fisher
NDT Inspector
Canada, Joined Oct 2002, 5

Edward Fisher

NDT Inspector
Canada,
Joined Oct 2002
5
02:25 Nov-02-2002
co2 Pitting 13 Chrome

I am trying to find out if anyone has had much experience with find CO2 pitting on 13 chrome material in full lengths of pipe and the method used to detect that pitting. I have about 16000 feet of pipe to look at with minor pitting .017" to .060" and I am having trouble with my signal to noise ratio just wondering if anyone out there knows or can help with this situation?


 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
00:13 Nov-04-2002
Re: co2 Pitting 13 Chrome
Ed,

Have you considered using LASER NDT to inspect the piping? The Laser-Optic Tube Inspection (LOTIS) process can reliably detect and quantify pitting with depths as shallow as +/-0.002" and pit diameters as small as 0.005". Currently there are laser probes built which can inspect piping up to 5.4" ID. Not sure what size your piping is?

For more information you might want to take a look at our web-site which can be found at http://www.qi2.com/field/fsddef.htm

If you have any further questions please contact me at the numbers listed below.

Regards,

Richard D. Roberts
V.P. Field Services
QUEST Integrated, Inc.
1012 Central Avenue South
Kent, Washington 98032 USA

Direct Tel: 1-253 872-9500 ext. 1275
Toll Free Tel: 1-800 233-3345 ext. 1275
Cell: 1-206 571-4302
Fax: 1-253-872-8967
Email: richardr@qi2.com
Web Site: http://www.qi2.com/field/fsddef.htm

-------------- ORIGIONAL MESSAGE ----------------
: I am trying to find out if anyone has had much experiencewith find CO2 pitting on 13 chrome material in full lengths of pipe and the method used to detect that pitting. I have about 16000 feet of pipe to look at with minor pitting .017" to .060" and I am having trouble with my signal to noise ratio just wondering if anyone out there knows or can help with this situation?



 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window