where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2004 views
Technical Discussions
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
08:29 May-16-2006
Wiring diagram for Magnaflux Model KCH-3D 1957

Hi,

I'm looking to modify my cable unit and require a wiring diagram for the following equipment.

Magnaflux Model KCH-3D
USAF Stock # 7CAD-444500
220 /440 Volts 60 cycles
Max Line Amp 200 / 100

Date of manufacture September 1957 (it's still in new condition!)

Any help would be most appreciated.

DH


 
 Reply 
 
Nick
Nick
16:30 Mar-20-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to David Hermanutz at 08:29 May-16-2006 (Opening).

Download

A long time later, but here is the diagram for anyone else who is looking for it
 
 Reply 
 
Albert
Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation, USA, Joined Jun 2012, 140

Albert

Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation,
USA,
Joined Jun 2012
140
21:34 Mar-22-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to Nick at 16:30 Mar-20-2013 .

Also, i have emailed Magnaflux and was able to get wiring diagrams from them with very little trouble.

 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window