where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

838 views
Technical Discussions
Dr Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
08:35 Nov-05-2002
Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete

Dear Colleagues,


I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 283

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
283
01:38 Nov-07-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I think you may find the standoff too great to obtain reliable results. In the UK the civil industry is working with AE through a product called AECORR to monitor active corrosion of steel in concrete. It may be worth looking at.


 
 Reply 
 
Weihua Mao
Weihua Mao
05:38 Nov-11-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I guess that we are doing similar inpsection to your problem.
Our company, the Pressure Pipe Inspection Company, developed a technique called Remote Field Eddy Current / Transformer Coupling. We inspect the broken prestressing steel wires in concrete pipes. In general, the pipes are underground and we inspect them from the inside of the pipes. We can tell the number of broken steel wires even there is a Gauge 14 steel cylinder.

Could you tell me more details about your problem? Such as the geometry and requrement.


Weihua Mao

: Dear Colleagues,
.
:
: I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
: The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.





 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window