where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
693 views
Technical Discussions
ismail sarpun
ismail sarpun
02:26 Nov-06-2002
experimetal setup

I want to establish a system which I can determine grain size. so is there anyone can help me?


 
 Reply 
 
DJ Kallhof
DJ Kallhof
04:38 Nov-07-2002
Re: experimetal setup
: I want to establish a system which I can determine grain size. so is there anyone can help me?
.
Polishing the material to a mirror finish, followed by a chemical etch, will reveal the grain sufficiently to observe with proper magnification. A permanent record may be obtained by replicating the surface. Respond back with the material you are working with.


 
 Reply 
 
Scott Longstreet
NDT Inspector, Metallographer
Areospace, USA, Joined Apr 2002, 5

Scott Longstreet

NDT Inspector, Metallographer
Areospace,
USA,
Joined Apr 2002
5
05:21 Nov-07-2002
Re: experimetal setup
: : I want to establish a system which I can determine grain size. so is there anyone can help me?
: .
: Polishing the material to a mirror finish, followed by a chemical etch, will reveal the grain sufficiently to observe with proper magnification. A permanent record may be obtained by replicating the surface. Respond back with the material you are working with.
.
ASTM E8 Would be an excellent refernece guide!


 
 Reply 
 
Scott Longstreet
Scott Longstreet
06:29 Nov-07-2002
Re: experimetal setup
: I want to establish a system which I can determine grain size. so is there anyone can help me?
.
Soory, I meant to suggest ASTM E3 as a guide. For that matter, look into the many ASTM standars for help.


 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window