where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonatest Ltd
From our three distinct business centres in the UK, USA and CANADA, Sonatest design and produce a leading range of high performance ultrasonic NDT equipment and accessories.
797 views
Technical Discussions
Dr Ahmed Yamani
Director, - President & CEO
Yamani Institute of Technology, Algeria, Joined Nov 2001, 23

Dr Ahmed Yamani

Director, - President & CEO
Yamani Institute of Technology,
Algeria,
Joined Nov 2001
23
08:35 Nov-05-2002
Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete

Dear Colleagues,


I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.



 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
01:38 Nov-07-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I think you may find the standoff too great to obtain reliable results. In the UK the civil industry is working with AE through a product called AECORR to monitor active corrosion of steel in concrete. It may be worth looking at.


 
 Reply 
 
Weihua Mao
Weihua Mao
05:38 Nov-11-2002
Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete
I guess that we are doing similar inpsection to your problem.
Our company, the Pressure Pipe Inspection Company, developed a technique called Remote Field Eddy Current / Transformer Coupling. We inspect the broken prestressing steel wires in concrete pipes. In general, the pipes are underground and we inspect them from the inside of the pipes. We can tell the number of broken steel wires even there is a Gauge 14 steel cylinder.

Could you tell me more details about your problem? Such as the geometry and requrement.


Weihua Mao

: Dear Colleagues,
.
:
: I appreciate very much if any one can direct me to techniques used or any literature available on the assessment of corrosion in Fusion-Bonded-Epoxy-Coated Rebar in concrete.
: The cover (depth of concrete above the bar) is about 4 to 6 cm, I was thinking of using eddy current techniques for that. Any comments are much welcome.





 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window