where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
840 views
Technical Discussions
Hason
Hason
08:13 Nov-09-2002
pulse amplifer wanted

I want to buy a high frequency(20MHz) pulse amplifer to amplify the pulsed sine wave to drive PZT transducer. the requirement: output voltage: Vp-p>=100V. Could anyone provide some information?


 
 Reply 
 
JM lecoeur
Director
LECOEUR ELECTRONIQUE, France, Joined Nov 1998, 1

JM lecoeur

Director
LECOEUR ELECTRONIQUE,
France,
Joined Nov 1998
1
00:05 Nov-10-2002
Re: pulse amplifer wanted
: I want to buy a high frequency(20MHz) pulse amplifer to amplify the pulsed sine wave to drive PZT transducer. the requirement: output voltage: Vp-p>=100V. Could anyone provide some information?

We have some pulse amplifers (analog and square).


 
 Reply 
 
Kevin Barton
Kevin Barton
02:10 Nov-11-2002
Re: pulse amplifer wanted
Dear Hanson,

We have a two Preamplifiers in the 20MHz frequency range. The first unit is a 5676 and has a bandwidth of 20MHz and the second unit is a 5678 and a has a 40MHz bandwidth. The receiver bandwidth for both of these units is based on a -3db specification. For example, if you are using 20MHz frequency, I would go with the 5678 because the 5676 would cut off some of the frequency. In addition, you may purchase the unit in either a DC battery operated configuration or a AC 115 voltage configuration.

If you have any further questions or would like a firm quotation, please feel free to contact me at the information listed below.

Sincerely,


Kevin M. Barton
Technical Sales Engineer, Instrumentation and Systems
NDT Division of GE Panametrics
221 Crescent Street, Waltham, MA 02453-3497 USA
Tel (781) 472-1260, Fax (781) 788-9787
E-mail: kevin.barton@ps.ge.com
Website: www.panametrics.com

_______________________________________________________
: I want to buya high frequency(20MHz) pulse amplifer to amplify the pulsed sine wave to drive PZT transducer. the requirement: output voltage: Vp-p>=100V. Could anyone provide some information?
.



 
 Reply 
 
Hason
Hason
06:23 Nov-13-2002
Re: pulse amplifer wanted
: : I want to buy a high frequency(20MHz) pulse amplifer to amplify the pulsed sine wave to drive PZT transducer. the requirement: output voltage: Vp-p>=100V. Could anyone provide some information?
.
: We have some pulse amplifers (analog and square).
.
Acturally, we are seeking for a pulse amplifier to amplify the pulsed sine wave provided by function generator to excite the PZT ultrasonic ransducer.
our requirment is: the amplifer can amplify the burst sine wave (20MHz,
10MHz, 5MHz, burst rate 1-10KHz, cycle:4-16) to the voltage of about at least Vp-p=80V.
if a pulser (comine the function of burst wave generation and amplication) can satisfy our requirment. that's also OK!


 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window