where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

952 views
Technical Discussions
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
07:27 Nov-22-2002
Liquid Level in Halon Bottles

Colleagues -
Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
Thanks in advance for any replies.
Tim Heimel


 
 Reply 
 
Jim Knowles
Jim Knowles
07:49 Nov-22-2002
Re: Liquid Level in Halon Bottles
: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Velocity in liquid Halon is around ~800m/s
Calibrate your PE system for the far side of the container.
Alternatively try a through transmission technique.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
02:18 Nov-22-2002
Re: Liquid Level in Halon Bottles
Tim:
We have had success using infrared scanners and/or non-contact temperature probes along with hot water to measure halon levels in vertical cylinders located in oil facilities in Alaska. Hot water is poured down the outside of the cylinder, then the surface temperature is scanned with a non-contact IR sensor to discover the halon liquid level in the cylinder.


: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
05:42 Nov-23-2002
Re: Liquid Level in Halon Bottles
: : Colleagues -
: : Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Thanks to all for the prompt & informed responses. I will try some of them next week and let the group know it turns out.

Tim
.
: Velocity in liquid Halon is around ~800m/s
: Calibrate your PE system for the far side of the container.
: Alternatively try a through transmission technique.
: : Thanks in advance for any replies.
: : Tim Heimel
: .
.



 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window