where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

956 views
Technical Discussions
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
07:27 Nov-22-2002
Liquid Level in Halon Bottles

Colleagues -
Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
Thanks in advance for any replies.
Tim Heimel


 
 Reply 
 
Jim Knowles
Jim Knowles
07:49 Nov-22-2002
Re: Liquid Level in Halon Bottles
: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Velocity in liquid Halon is around ~800m/s
Calibrate your PE system for the far side of the container.
Alternatively try a through transmission technique.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
John Pursley
R & D
Envision Product Design, USA, Joined Oct 1999, 23

John Pursley

R & D
Envision Product Design,
USA,
Joined Oct 1999
23
02:18 Nov-22-2002
Re: Liquid Level in Halon Bottles
Tim:
We have had success using infrared scanners and/or non-contact temperature probes along with hot water to measure halon levels in vertical cylinders located in oil facilities in Alaska. Hot water is poured down the outside of the cylinder, then the surface temperature is scanned with a non-contact IR sensor to discover the halon liquid level in the cylinder.


: Colleagues -
: Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.
: Thanks in advance for any replies.
: Tim Heimel
.



 
 Reply 
 
Tim Heimel
NDT Inspector,
USA, Joined May 2001, 2

Tim Heimel

NDT Inspector,
USA,
Joined May 2001
2
05:42 Nov-23-2002
Re: Liquid Level in Halon Bottles
: : Colleagues -
: : Has anyone had success in applying UT techniques to detect the liquid level in vertically mounted halon cylinders? Available equipment is Epoch III flaw detector and standard contact probes. Thus far I have had no success due to uncertainty of acoustic properties of halon and lack of a perceptible change in bottle/halon interface using existing instrumentation. Before I embark on further research, I am posting this request.

Thanks to all for the prompt & informed responses. I will try some of them next week and let the group know it turns out.

Tim
.
: Velocity in liquid Halon is around ~800m/s
: Calibrate your PE system for the far side of the container.
: Alternatively try a through transmission technique.
: : Thanks in advance for any replies.
: : Tim Heimel
: .
.



 
 Reply 
 

Product Spotlight

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window