where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
754 views
Technical Discussions
Stefan Hartmann
Stefan Hartmann
04:47 Dec-04-2002
Online-Wallthickness-Monitoring on hot tubes

I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
A problem is that the carbonsteel-pipes are hot (200°C).


 
 Reply 
 
Pim van Andel
Pim van Andel
00:46 Dec-05-2002
Re: Online-Wallthickness-Monitoring on hot tubes
We are working on a research programme in which we develop a wireless EMAT sensor for ultrasonic WT measurements.
The EMAT sensor should withstand 200 degrees celcius.
Some more info and preliminary results can be found at:
http://www.zes.nl/ZE_HOIS.html
http://www.zes.nl/ZE_emat_news.html

: I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
: A problem is that the carbonsteel-pipes are hot (200°C).
.



 
 Reply 
 
Leif Jeppesen
R & D
FORCE Technology, Denmark, Joined Nov 1998, 6

Leif Jeppesen

R & D
FORCE Technology,
Denmark,
Joined Nov 1998
6
03:18 Dec-05-2002
Re: Online-Wallthickness-Monitoring on hot tubes
: I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
: A problem is that the carbonsteel-pipes are hot (200°C).
.
Dear Sir,

FORCE Technology has delivered a system with permanently installed transducers for a German client, The system has been running for the last 2 years.

Please contact me for more information.


Leif Jeppesen


 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window