where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

662 views
Technical Discussions
Damir Markucic
Damir Markucic
04:53 Dec-04-2002
measuring crack depth

Dear all,
would like to hear if anybody has experience with measuring depth of surface cracks in the range from 0.1 mm to several millimeters.
Which NDT methods/techniques used?
What is the order of achieved accuracy/precision?
On which materials applied?
With commercial or specially developed instrument?

Regards,
Damir


 
 Reply 
 
Phil Thayer
Phil Thayer
05:08 Dec-04-2002
Re: measuring crack depth
Resistivity methold is good for conductive materials. Uses 4 point probe and metered current. Eddy current can also be used. Best on non-ferous materials. We have a new resistivity system, the M100A. If you like, visit our web page at pacndt.com. Our call 609-716-4051. Good luck eith your solution.


Dear all,
: would like to hear if anybody has experience with measuring depth of surface cracks in the range from 0.1 mm to several millimeters.
: Which NDT methods/techniques used?
: What is the order of achieved accuracy/precision?
: On which materials applied?
: With commercial or specially developed instrument?
.
: Regards,
: Damir
.



 
 Reply 
 

Product Spotlight

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window