where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

785 views
Technical Discussions
Stefan Hartmann
Stefan Hartmann
04:47 Dec-04-2002
Online-Wallthickness-Monitoring on hot tubes

I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
A problem is that the carbonsteel-pipes are hot (200°C).


 
 Reply 
 
Pim van Andel
Pim van Andel
00:46 Dec-05-2002
Re: Online-Wallthickness-Monitoring on hot tubes
We are working on a research programme in which we develop a wireless EMAT sensor for ultrasonic WT measurements.
The EMAT sensor should withstand 200 degrees celcius.
Some more info and preliminary results can be found at:
http://www.zes.nl/ZE_HOIS.html
http://www.zes.nl/ZE_emat_news.html

: I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
: A problem is that the carbonsteel-pipes are hot (200°C).
.



 
 Reply 
 
Leif Jeppesen
R & D
FORCE Technology, Denmark, Joined Nov 1998, 6

Leif Jeppesen

R & D
FORCE Technology,
Denmark,
Joined Nov 1998
6
03:18 Dec-05-2002
Re: Online-Wallthickness-Monitoring on hot tubes
: I am interested in possibilities for permanent monitoring of wallthicknesses with ultrasonics.
: A problem is that the carbonsteel-pipes are hot (200°C).
.
Dear Sir,

FORCE Technology has delivered a system with permanently installed transducers for a German client, The system has been running for the last 2 years.

Please contact me for more information.


Leif Jeppesen


 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window