where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2057 views
Technical Discussions
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:09 Dec-12-2002
EMAT device

I am looking for companies that can provide EMAT´s equipments.
I´d appreciate if someone can help me.
Thanks in advance.
My kind regards

Cesar


 
 Reply 
 
Borja Lopez
Borja Lopez
07:29 Dec-12-2002
Re: EMAT device
check www.innerspec.com


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Grant Gordon
R & D
McDermott Technology, USA, Joined Jun 2002, 1

Grant Gordon

R & D
McDermott Technology,
USA,
Joined Jun 2002
1
07:55 Dec-12-2002
Re: EMAT device
Cesar:
McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:57 Dec-12-2002
Re: EMAT device
I have sended several e-mails to them, but so far, any reply.
: check www.innerspec.com
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:10 Dec-12-2002
Re: EMAT device
Can you give us some more information on your application?

There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.

e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.

Other companies make EMATS for other situations.

Joe


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:25 Dec-12-2002
Re: EMAT device
::The company that I work with, ISQ, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Cesar:
: McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:29 Dec-12-2002
Re: EMAT device
::Joe,
Thanks for your reply.
The company that I work with, ISQ-Portugal, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Can you give us some more information on your application?
.
: There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.
.
: e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.
.
: Other companies make EMATS for other situations.
.
: Joe
.
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
02:47 Dec-13-2002
Re: EMAT device
::Our especific range of applications are: thickness (5 up to 10 mm), material (carbon steel), Minimal Flaw sizing (0,5 mm), for on-site inspections.
We usually work with Krautkramer equipments, but if your devices can not be adapted to our equipments, there is no problem. So, you can send me a full quotation for complete system(Probe, hardware, software,etc).

my kind regards


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window