where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1970 views
Technical Discussions
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:09 Dec-12-2002
EMAT device

I am looking for companies that can provide EMAT´s equipments.
I´d appreciate if someone can help me.
Thanks in advance.
My kind regards

Cesar


 
 Reply 
 
Borja Lopez
Borja Lopez
07:29 Dec-12-2002
Re: EMAT device
check www.innerspec.com


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Grant Gordon
R & D
McDermott Technology, USA, Joined Jun 2002, 1

Grant Gordon

R & D
McDermott Technology,
USA,
Joined Jun 2002
1
07:55 Dec-12-2002
Re: EMAT device
Cesar:
McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:57 Dec-12-2002
Re: EMAT device
I have sended several e-mails to them, but so far, any reply.
: check www.innerspec.com
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
08:10 Dec-12-2002
Re: EMAT device
Can you give us some more information on your application?

There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.

e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.

Other companies make EMATS for other situations.

Joe


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:25 Dec-12-2002
Re: EMAT device
::The company that I work with, ISQ, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Cesar:
: McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:29 Dec-12-2002
Re: EMAT device
::Joe,
Thanks for your reply.
The company that I work with, ISQ-Portugal, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Can you give us some more information on your application?
.
: There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.
.
: e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.
.
: Other companies make EMATS for other situations.
.
: Joe
.
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
02:47 Dec-13-2002
Re: EMAT device
::Our especific range of applications are: thickness (5 up to 10 mm), material (carbon steel), Minimal Flaw sizing (0,5 mm), for on-site inspections.
We usually work with Krautkramer equipments, but if your devices can not be adapted to our equipments, there is no problem. So, you can send me a full quotation for complete system(Probe, hardware, software,etc).

my kind regards


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window