where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2046 views
Technical Discussions
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:09 Dec-12-2002
EMAT device

I am looking for companies that can provide EMAT´s equipments.
I´d appreciate if someone can help me.
Thanks in advance.
My kind regards

Cesar


 
 Reply 
 
Borja Lopez
Borja Lopez
07:29 Dec-12-2002
Re: EMAT device
check www.innerspec.com


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Grant Gordon
R & D
McDermott Technology, USA, Joined Jun 2002, 1

Grant Gordon

R & D
McDermott Technology,
USA,
Joined Jun 2002
1
07:55 Dec-12-2002
Re: EMAT device
Cesar:
McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html




 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:57 Dec-12-2002
Re: EMAT device
I have sended several e-mails to them, but so far, any reply.
: check www.innerspec.com
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
08:10 Dec-12-2002
Re: EMAT device
Can you give us some more information on your application?

There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.

e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.

Other companies make EMATS for other situations.

Joe


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:25 Dec-12-2002
Re: EMAT device
::The company that I work with, ISQ, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Cesar:
: McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:29 Dec-12-2002
Re: EMAT device
::Joe,
Thanks for your reply.
The company that I work with, ISQ-Portugal, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Can you give us some more information on your application?
.
: There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.
.
: e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.
.
: Other companies make EMATS for other situations.
.
: Joe
.
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



 
 Reply 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
02:47 Dec-13-2002
Re: EMAT device
::Our especific range of applications are: thickness (5 up to 10 mm), material (carbon steel), Minimal Flaw sizing (0,5 mm), for on-site inspections.
We usually work with Krautkramer equipments, but if your devices can not be adapted to our equipments, there is no problem. So, you can send me a full quotation for complete system(Probe, hardware, software,etc).

my kind regards


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



 
 Reply 
 

Product Spotlight

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window