where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
749 views
Technical Discussions
Stefan Hartmann
Stefan Hartmann
01:38 Dec-13-2002
Phased Arrays

Could anyone tell me how Phased-Array-Systems work or does anyone know where I can find information on that topic?


 
 Reply 
 
M. Anderson
M. Anderson
02:31 Dec-13-2002
Re: Phased Arrays
: Could anyone tell me how Phased-Array-Systems work or does anyone know where I can find information on that topic?
. The basic premise for all PA systems involves an array transducer consisting of a set of small, individual elements that are independently driven. Although these elements may be pulsed individually, or in groups, to simulate conventional transducer excitation, the real strength of this technique lies in the capability of the system to electronically delay these elements during both generation and reception of ultrasonic signals. The wave-fronts produced by subsets of elements interact within the inspected component to produce a resultant, phase-integrated ultrasonic wave. The PA system can therefore steer and focus the integrated ultrasonic beam within the component.



 
 Reply 
 
Cliff Rawlinson
Cliff Rawlinson
06:37 Dec-14-2002
Re: Phased Arrays
: Could anyone tell me how Phased-Array-Systems work or does anyone know where I can find information on that topic?
.
Please visit our web site www.auto-ut.com

We have the Worlds first and only auto-ut simulator.

Now training can be done on a lap top


 
 Reply 
 
Jeff Leak
Jeff Leak
07:22 Dec-16-2002
Re: Phased Arrays

Stefan -

I have been using phased-array UT (PAUT) for about three years now. We use a system built by R/D Tech to inspect a new type of weldment called "Friction Stir Welds" (FSW).

The PAUT has a 'water wedge', similar to immersion, and is very adapt at finding extremely tight lack-of-penetration, where other methods such as RT, PT, and even conventional UT, will have major troubles detecting the flaw.

NASA and Lockheed-Martin are implementing this PAUT inspection on the new FSW on the External Tank. Boeing has been using the PAUT on FSW as well, and recently launched a rocket with FSW inspected by the R/D Tech system.

http://www.rd-tech.com/

Hope this helps.

Jeff





 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
09:13 Dec-16-2002
Re: Phased Arrays
:Hi Stefan,
I am sure you understand that a sound field can be focused using a lens or a curved piezoelectric source. These techniques delay the sound from some areas of the aperture relative to other areas.
In a phased-array system, the active transducer area is segmented into smaller areas, each of which can be controlled independently. By delaying certain areas, the resulting sound field can be made to simulate a focused or steered transducer. The advantage is that the steering and focusing are under electronic control and can be changed on a rep-rate basis.

I have some PowerPoint presentations that demonstrate the process. Contact me and I'll send you a copy.

Paul

Could anyone tell me how Phased-Array-Systems work or does anyone know where I can find information on that topic?
.



 
 Reply 
 
Joerg Schulze-Clewing
Joerg Schulze-Clewing
01:41 Dec-18-2002
Re: Phased Arrays
: Could anyone tell me how Phased-Array-Systems work or does anyone know where I can find information on that topic?
.
Hi Stefan,

A good resource is the "Radar Handbook" by Skolnik,
chapter 7 in the 2nd edition. Radar phased arrays are
similar and I use this resource a lot although my
work is in medical ultrasound.

Good luck, Joerg.



 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window