where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
8298 views
Technical Discussions
John carpenter
John carpenter
21:08 Aug-11-2013
Wire IQI

Hello everyoane,
How you calculate the radiographic sensitivity when using the wire IQI.I only used the hole type penetrameters, but now there s a European customer that want us to use the wire type.I know there are some standards out there, but maybe somebody can explain it to me much clearer.Thank you

 
 Reply 
 
andrew cunningham
NDT Inspector
Canada, Joined Jun 2008, 238

andrew cunningham

NDT Inspector
Canada,
Joined Jun 2008
238
23:30 Aug-11-2013
Re: Wire IQI
In Reply to John carpenter at 21:08 Aug-11-2013 (Opening).

If you are shooting through 100mm of steel and you can see a IQI 1mm wire. I would think you would have 1% But I could be wrong.

 
 Reply 
 
John carpenter
John carpenter
23:42 Aug-11-2013
Re: Wire IQI
In Reply to andrew cunningham at 23:30 Aug-11-2013 .

Thank you for your answer, but I think there s a formula that need to be applied based on the thinnest wire visible.Anyway if somebody have experience working with this type of IQI please give me some feedback.

 
 Reply 
 
Ed T.
Other, ASNT Level III, UT, RT, MT, PT, VT
NDT Level III, Saudi Arabia, Joined Sep 2011, 169

Ed T.

Other, ASNT Level III, UT, RT, MT, PT, VT
NDT Level III,
Saudi Arabia,
Joined Sep 2011
169
08:12 Aug-12-2013
Re: Wire IQI
In Reply to John carpenter at 23:42 Aug-11-2013 .

I believe this is correct.

Calculate the radiographic sensitivity for a wire-type penetrameter using the formula:

Sensitivity (%) = Thickness of the thinnest wire * 100/Specimen thickness

 
 Reply 
 
shahid
NDT Inspector,
Pakistan, Joined Mar 2013, 10

shahid

NDT Inspector,
Pakistan,
Joined Mar 2013
10
13:49 Aug-12-2013
Re: Wire IQI
In Reply to John carpenter at 21:08 Aug-11-2013 (Opening).

Hi Sorin,

If you want to calculate the radiographic sensitivity when using the wire IQI, you can use this formula .
Thickness of the thinnest wire x 100%
Sensitivity = -------------------------------------------------
Material thickness
AS you know you need 2% sensitivity for accept to radiography film. I have DIN & ISO IQI sensitivity chart that is alrady calculated . If you wants contact me.
Regard

 
 Reply 
 
John carpenter
John carpenter
01:29 Aug-13-2013
Re: Wire IQI
In Reply to shahid at 13:49 Aug-12-2013 .

Thank you very much guys for the info.
Shahid if can give me those charts I would realy appreciate it.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 877

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
877
02:10 Aug-13-2013
Re: Wire IQI
In Reply to John carpenter at 01:29 Aug-13-2013 .

John,

Have a look at ASTM E747. In there it gives you the equivalence for hole and wire type penetrameters.

 
 Reply 
 
EDUARDO VERZOSA
EDUARDO VERZOSA
08:36 Dec-23-2013
Re: Wire IQI
In Reply to shahid at 13:49 Aug-12-2013 .


kindly gave to me the information ASTM of 4A & 4B WIRE DIAMETER CHART


 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window