where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
8294 views
Technical Discussions
John carpenter
John carpenter
21:08 Aug-11-2013
Wire IQI

Hello everyoane,
How you calculate the radiographic sensitivity when using the wire IQI.I only used the hole type penetrameters, but now there s a European customer that want us to use the wire type.I know there are some standards out there, but maybe somebody can explain it to me much clearer.Thank you

 
 Reply 
 
andrew cunningham
NDT Inspector
Canada, Joined Jun 2008, 238

andrew cunningham

NDT Inspector
Canada,
Joined Jun 2008
238
23:30 Aug-11-2013
Re: Wire IQI
In Reply to John carpenter at 21:08 Aug-11-2013 (Opening).

If you are shooting through 100mm of steel and you can see a IQI 1mm wire. I would think you would have 1% But I could be wrong.

 
 Reply 
 
John carpenter
John carpenter
23:42 Aug-11-2013
Re: Wire IQI
In Reply to andrew cunningham at 23:30 Aug-11-2013 .

Thank you for your answer, but I think there s a formula that need to be applied based on the thinnest wire visible.Anyway if somebody have experience working with this type of IQI please give me some feedback.

 
 Reply 
 
Ed T.
Other, ASNT Level III, UT, RT, MT, PT, VT
NDT Level III, Saudi Arabia, Joined Sep 2011, 169

Ed T.

Other, ASNT Level III, UT, RT, MT, PT, VT
NDT Level III,
Saudi Arabia,
Joined Sep 2011
169
08:12 Aug-12-2013
Re: Wire IQI
In Reply to John carpenter at 23:42 Aug-11-2013 .

I believe this is correct.

Calculate the radiographic sensitivity for a wire-type penetrameter using the formula:

Sensitivity (%) = Thickness of the thinnest wire * 100/Specimen thickness

 
 Reply 
 
shahid
NDT Inspector,
Pakistan, Joined Mar 2013, 10

shahid

NDT Inspector,
Pakistan,
Joined Mar 2013
10
13:49 Aug-12-2013
Re: Wire IQI
In Reply to John carpenter at 21:08 Aug-11-2013 (Opening).

Hi Sorin,

If you want to calculate the radiographic sensitivity when using the wire IQI, you can use this formula .
Thickness of the thinnest wire x 100%
Sensitivity = -------------------------------------------------
Material thickness
AS you know you need 2% sensitivity for accept to radiography film. I have DIN & ISO IQI sensitivity chart that is alrady calculated . If you wants contact me.
Regard

 
 Reply 
 
John carpenter
John carpenter
01:29 Aug-13-2013
Re: Wire IQI
In Reply to shahid at 13:49 Aug-12-2013 .

Thank you very much guys for the info.
Shahid if can give me those charts I would realy appreciate it.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 877

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
877
02:10 Aug-13-2013
Re: Wire IQI
In Reply to John carpenter at 01:29 Aug-13-2013 .

John,

Have a look at ASTM E747. In there it gives you the equivalence for hole and wire type penetrameters.

 
 Reply 
 
EDUARDO VERZOSA
EDUARDO VERZOSA
08:36 Dec-23-2013
Re: Wire IQI
In Reply to shahid at 13:49 Aug-12-2013 .


kindly gave to me the information ASTM of 4A & 4B WIRE DIAMETER CHART


 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window