where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
1196 views
Technical Discussions
James JOE
Sales
South Korea, Joined Sep 2002, 9

James JOE

Sales
South Korea,
Joined Sep 2002
9
03:29 Dec-17-2002
Thickness Gauge (PJG)

We are looking for Thickness Gauge without remove coating.
We understand these thickness using echo-to-echo method.
Would you please send us catalogues, quotation and delivery, if you can supply it to us?




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
06:02 Dec-18-2002
Re: Thickness Gauge (PJG)
: We are looking for Thickness Gauge without remove coating.
: We understand these thickness using echo-to-echo method.
: Would you please send us catalogues, quotation and delivery, if you can supply it to us?
.
The Krautkramer DM4 multi series has a function for measuring thickness of materials through a paint coating.
Alternatively you could use the DMS2 family which also uses the multi-echo function.
Or the patented DMS2TC with topcoat mode.
Details on the KK website
Reagrds
Neil Burleigh


 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
09:16 Dec-18-2002
Re: Thickness Gauge (PJG)
Or continuing the theme.

The Sonatest P-Gage, The Dakota MMX series, or the Sonatest Alphagage.....

I'm not entirely sure all this shameless product plugging is in the spirit of the forum, but I'll not be left out...

Joe


: : We are looking for Thickness Gauge without remove coating.
: : We understand these thickness using echo-to-echo method.
: : Would you please send us catalogues, quotation and delivery, if you can supply it to us?
: .
: The Krautkramer DM4 multi series has a function for measuring thickness of materials through a paint coating.
: Alternatively you could use the DMS2 family which also uses the multi-echo function.
: Or the patented DMS2TC with topcoat mode.
: Details on the KK website
: Reagrds
: Neil Burleigh
.



 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
02:21 Jan-09-2003
Re: Thickness Gauge (PJG)
Dear Forum Members,

In keeping with the spirit of the forum I would like to offer the following:


Although it is quite common for modern Ultrasonic Thickness gauging equipment to operate in Echo to Echo mode I would like to make you aware of the following potential errors that you may encounter:

The acoustic impedance of the coating may not allow for echo to echo exclusion with standard full waveform displays ( RF waveform and test area usually required )

Dual transducers may produce a "shear" component in certain material ranges that could cause a low reading error

A waveform display, proper training and competency is required to discern if the echo to echo feature is working correctly.

Best Regards,

David Hermanutz
GE Panametrics
Melbourne

PS please feel free to contact myself directly with any concerns or comments

: Or continuing the theme.
.
: The Sonatest P-Gage, The Dakota MMX series, or the Sonatest Alphagage.....
.
: I'm not entirely sure all this shameless product plugging is in the spirit of the forum, but I'll not be left out...
.
: Joe
.
:
: : : We are looking for Thickness Gauge without remove coating.
: : : We understand these thickness using echo-to-echo method.
: : : Would you please send us catalogues, quotation and delivery, if you can supply it to us?
: : .
: : The Krautkramer DM4 multi series has a function for measuring thickness of materials through a paint coating.
: : Alternatively you could use the DMS2 family which also uses the multi-echo function.
: : Or the patented DMS2TC with topcoat mode.
: : Details on the KK website
: : Reagrds
: : Neil Burleigh
: .
.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window