where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

627 views
Technical Discussions
Patrick Huttenhuis
Patrick Huttenhuis
09:19 Jan-09-2003
NDT's for middle voltage cables

A client of us, a producer of middle voltage cables (up to 50 kV) has problems during the extrusion process. During the extrusion process once in a while there arise small bubbles (1-3 mm) in the isolating poly-ethylene layer. It is believed that this bubbles will result in undesirable voltage breakdown.
The cable consists of a 12-22 mm aluminium pipe. Around this pipe a three layer polymer is constructed during one extrusion step. The three layers are:

- a black (carbon) PE layer of appr. 0.5 mm
- a white PE layer of appr. 5 mm. In this layer the bubbles have been seen,
a black (carbon) PE layer of appr. 0.5 mm

After the extrusion the cable is vulcanised and cooled.

Do you know if there are non-destructieve methods (preferable online) which can indicate the bubbles in the polymer layer. If yes, what kind of methods are available, what are the conditions and advantage / disadvantages of the methods. The production speed of the cable is betwen 8 and 30 m/min.

Thank you in advance for your advice.

Kind Regards,

Patrick Huttenhuis
Procede Twente B.V.
patrick.huttenhuis@procede.nl


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
09:45 Jan-09-2003
Re: NDT's for middle voltage cables
: A client of us, a producer of middle voltage cables (up to 50 kV) has problems during the extrusion process. During the extrusion process once in a while there arise small bubbles (1-3 mm) in the isolating poly-ethylene layer. It is believed that this bubbles will result in undesirable voltage breakdown.
: The cable consists of a 12-22 mm aluminium pipe. Around this pipe a three layer polymer is constructed during one extrusion step. The three layers are:
:
: - a black (carbon) PE layer of appr. 0.5 mm
: - a white PE layer of appr. 5 mm. In this layer the bubbles have been seen,
: a black (carbon) PE layer of appr. 0.5 mm
:
: After the extrusion the cable is vulcanised and cooled.
:
: Do you know if there are non-destructieve methods (preferable online) which can indicate the bubbles in the polymer layer. If yes, what kind of methods are available, what are the conditions and advantage / disadvantages of the methods. The production speed of the cable is betwen 8 and 30 m/min.
:
: Thank you in advance for your advice.
.
: Kind Regards,
.
: Patrick Huttenhuis
: Procede Twente B.V.
: patrick.huttenhuis@procede.nl
.

Dear Partick,
Sounds as if an Electronics solution rather than an NDT solution may be able to detect these bubbles.
I suggest that you speak with some electronics experts.
My thoughts are that the bubbles inside the 5 mm layer will affect the effective dielectric constant, and looking at the electrical capacity between the aluminium pipe and a separate electrode on the outside of the wrapped cable may provide a solution.
The thicknesses however may be fairly high to have a measurable effect.

Veel succes met de toepassing.
I wish you success with the application.

Godfrey Hands


 
 Reply 
 
Jörg Collrep
Jörg Collrep
00:02 Jan-09-2003
Re: NDT's for middle voltage cables
Dear Patrick,
this kind of defects could easily be detected by shearography but not within the production speed as we need some time ( 3 - 5 sec )to excite the cable with a very low thermal or vacuum excitation and acquire an image under loaded and unloaded condition. If you would like to know more about the technique pls reply to me directly.
Thanks
Jörg Collrep
Steinbichler Optotechnik GmbH
www.steinbichler.de


: A client of us, a producer of middle voltage cables (up to 50 kV) has problems during the extrusion process. During the extrusion process once in a while there arise small bubbles (1-3 mm) in the isolating poly-ethylene layer. It is believed that this bubbles will result in undesirable voltage breakdown.
: The cable consists of a 12-22 mm aluminium pipe. Around this pipe a three layer polymer is constructed during one extrusion step. The three layers are:
:
: - a black (carbon) PE layer of appr. 0.5 mm
: - a white PE layer of appr. 5 mm. In this layer the bubbles have been seen,
: a black (carbon) PE layer of appr. 0.5 mm
:
: After the extrusion the cable is vulcanised and cooled.
:
: Do you know if there are non-destructieve methods (preferable online) which can indicate the bubbles in the polymer layer. If yes, what kind of methods are available, what are the conditions and advantage / disadvantages of the methods. The production speed of the cable is betwen 8 and 30 m/min.
:
: Thank you in advance for your advice.
.
: Kind Regards,
.
: Patrick Huttenhuis
: Procede Twente B.V.
: patrick.huttenhuis@procede.nl
.



 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window