where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Airstar Inc.
Application of the newest technologies, such as air-coupled ultrasound, digital instrumentation, signal processing, and transducer technology.
675 views
Technical Discussions
Christian Mueller
Christian Mueller
03:42 Jan-20-2003
Software 2D/3D Computed Tomography NDT

We are looking for software for high performance 2-D/3-D X-ray CT system.
We are intend to use this software in combination with Comet x-ray tube housing assembly.
Who has practical experiences in this business field ?

Thank’s
Christian



 
 Reply 
 
Jim Knowles
Jim Knowles
04:09 Jan-20-2003
Re: Software 2D/3D Computed Tomography NDT
: We are looking for software for high performance 2-D/3-D X-ray CT system.
: We are intend to use this software in combination with Comet x-ray tube housing assembly.
: Who has practical experiences in this business field ?
:
: Thank’s
: Christian
.I have worked for many years on both 2D/3D and CT Imaging, and in particular with the COMET 320Kv Bi Polar tubehead.
The imaging varied from small dense packages to small diamter 8-15 mm diamter fuel tube assemblies.

The imaging used both CCD area array 1024 x 1024 and line array (8 and 12bit).

Software packages have developed over the years and developing further as well as faster.
Contact X-TEK Systems UK, +44 (0) 1442 828700
www.xtek.co.uk



 
 Reply 
 
Umesh Kumar
Umesh Kumar
04:41 Mar-19-2003
Re: Software 2D/3D Computed Tomography NDT
We are working on industrial CT imaging for almost 10 years. We have developed industrial CT using both gamma ray sources and constant potential X-ray generators. We have complete data acquisition system software, image reconstruction software for parallel beam and fan beam configuration using linear detector array and X-rays. However these are customised as per specific hardware.

Kindly contact Head, Isotope Applucations Division, Bhabha Atomic Research Centre, Mumbai, India for further details.



 
 Reply 
 
Vitor Silva
Vitor Silva
00:19 Jul-16-2003
Re: Software 2D/3D Computed Tomography NDT
We are working Bhabha Atomic Research Centre, Mumbai, India for further details.
.




 
 Reply 
 
parvatham.k
parvatham.k
04:02 Apr-27-2004
Re: Software 2D/3D optical Tomography
: I am working in periyar maniammai engineering college.I am doing one project in the field of optical communcation. I want coding for parallel beam image reconstruction : .
.



 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window