where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
625 views
Technical Discussions
Christian Mueller
Christian Mueller
03:42 Jan-20-2003
Software 2D/3D Computed Tomography NDT

We are looking for software for high performance 2-D/3-D X-ray CT system.
We are intend to use this software in combination with Comet x-ray tube housing assembly.
Who has practical experiences in this business field ?

Thank’s
Christian



 
 Reply 
 
Jim Knowles
Jim Knowles
04:09 Jan-20-2003
Re: Software 2D/3D Computed Tomography NDT
: We are looking for software for high performance 2-D/3-D X-ray CT system.
: We are intend to use this software in combination with Comet x-ray tube housing assembly.
: Who has practical experiences in this business field ?
:
: Thank’s
: Christian
.I have worked for many years on both 2D/3D and CT Imaging, and in particular with the COMET 320Kv Bi Polar tubehead.
The imaging varied from small dense packages to small diamter 8-15 mm diamter fuel tube assemblies.

The imaging used both CCD area array 1024 x 1024 and line array (8 and 12bit).

Software packages have developed over the years and developing further as well as faster.
Contact X-TEK Systems UK, +44 (0) 1442 828700
www.xtek.co.uk



 
 Reply 
 
Umesh Kumar
Umesh Kumar
04:41 Mar-19-2003
Re: Software 2D/3D Computed Tomography NDT
We are working on industrial CT imaging for almost 10 years. We have developed industrial CT using both gamma ray sources and constant potential X-ray generators. We have complete data acquisition system software, image reconstruction software for parallel beam and fan beam configuration using linear detector array and X-rays. However these are customised as per specific hardware.

Kindly contact Head, Isotope Applucations Division, Bhabha Atomic Research Centre, Mumbai, India for further details.



 
 Reply 
 
Vitor Silva
Vitor Silva
00:19 Jul-16-2003
Re: Software 2D/3D Computed Tomography NDT
We are working Bhabha Atomic Research Centre, Mumbai, India for further details.
.




 
 Reply 
 
parvatham.k
parvatham.k
04:02 Apr-27-2004
Re: Software 2D/3D optical Tomography
: I am working in periyar maniammai engineering college.I am doing one project in the field of optical communcation. I want coding for parallel beam image reconstruction : .
.



 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window