where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

305 views
Technical Discussions
FM Ferreira
FM Ferreira
09:40 Jan-20-2003
cracks inside Al/CFRP assembly

Could anyone suggest me a way to control an assembly of Al(17mm)+CFRP(18mm)+Al(45mm)+CFRP(33mm)+Al(37mm)in what regards cracks at the third layer?
And with what accuracy?
Thanks in advance.


 
 Reply 
 
Jens Forker
Jens Forker
07:57 Jan-21-2003
Re: cracks inside Al/CFRP assembly
Hi,
AE may be of help here, but I would need more details (actual scope of testing, size/geometry of your component/part,...) to estimate if AE would really do the expected job.
Please send the details + your address to my email that I can provide further information.
regards
Jens

: Could anyone suggest me a way to control an assembly of Al(17mm)+CFRP(18mm)+Al(45mm)+CFRP(33mm)+Al(37mm)in what regards cracks at the third layer?
: And with what accuracy?
: Thanks in advance.
.



 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window