where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
1159 views
Career Discussions
Julie
Other,
n/a, USA, Joined Dec 2012, 4

Julie

Other,
n/a,
USA,
Joined Dec 2012
4
13:25 Nov-10-2013
employment

I am having extreme difficulty in finding a job. I have certificates in Radiation Safety and Ultrasonic Testing. Before taking these courses, I consulted with people in the NDT industry. Had I known the difficulty I would be having, I would not have invested in the classes. I need experience to get a job and a job to get experience....I would be grateful for the opportunity to work in the NDT industry in any capacity, I just need to get my foot in the door. Does anyone have any advice on how I can go about doing this? Thanks :)

 
 Reply 
 
andrew cunningham
NDT Inspector
Canada, Joined Jun 2008, 238

andrew cunningham

NDT Inspector
Canada,
Joined Jun 2008
238
19:15 Nov-11-2013
Re: employment
In Reply to Julie at 13:25 Nov-10-2013 (Opening).

This is not a new problem. It was true in the 70’s as it is today. The same question has been asked in this room, so I will advise you to look at, “newcomer how to gain experience to pass practical exams”
All the best and good luck

 
 Reply 
 
Julie Anne Bourgeois
Other,
n/a, USA, Joined Dec 2012, 4

Julie Anne Bourgeois

Other,
n/a,
USA,
Joined Dec 2012
4
23:51 Nov-11-2013
Re: employment
In Reply to andrew cunningham at 19:15 Nov-11-2013 .

Thanks, I appreciate it! A local company is hiring people like me; people that have the classes, but no experience. I was told, in January.....will continue networking...and hope for the best.

 
 Reply 
 
Albert
Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation, USA, Joined Jun 2012, 140

Albert

Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation,
USA,
Joined Jun 2012
140
05:02 Nov-12-2013
Re: employment
In Reply to Julie Anne Bourgeois at 23:51 Nov-11-2013 .

Search the internet

Try job websites, aerotek, Ive had a few calls from people I've connected with in Linkedin,

Heres a company with several ndt openings http://www.precast.com/

Heres a few in your state:
https://sjobs.brassring.com/1033/ASP/TG/cim_searchresults.asp?ref=11112013225719&SID=^cAn6Jm3VGXa7BAvtmNxTyD3gROYJaTu8MJ6HuGLHOUs4OKE9jnZkiQ==

Think casting, forging, oil fields, power generation and aerospace.

Keep at it, apply every where, even if you don't get the job, every interview is great practice.

Above all, remember, you haven't failed till you've given up

 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window