where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
1143 views
Career Discussions
Julie
Other,
n/a, USA, Joined Dec 2012, 4

Julie

Other,
n/a,
USA,
Joined Dec 2012
4
13:25 Nov-10-2013
employment

I am having extreme difficulty in finding a job. I have certificates in Radiation Safety and Ultrasonic Testing. Before taking these courses, I consulted with people in the NDT industry. Had I known the difficulty I would be having, I would not have invested in the classes. I need experience to get a job and a job to get experience....I would be grateful for the opportunity to work in the NDT industry in any capacity, I just need to get my foot in the door. Does anyone have any advice on how I can go about doing this? Thanks :)

    
 
 Reply 
 
andrew cunningham
NDT Inspector
Canada, Joined Jun 2008, 238

andrew cunningham

NDT Inspector
Canada,
Joined Jun 2008
238
19:15 Nov-11-2013
Re: employment
In Reply to Julie at 13:25 Nov-10-2013 (Opening).

This is not a new problem. It was true in the 70’s as it is today. The same question has been asked in this room, so I will advise you to look at, “newcomer how to gain experience to pass practical exams”
All the best and good luck

    
 
 Reply 
 
Julie Anne Bourgeois
Other,
n/a, USA, Joined Dec 2012, 4

Julie Anne Bourgeois

Other,
n/a,
USA,
Joined Dec 2012
4
23:51 Nov-11-2013
Re: employment
In Reply to andrew cunningham at 19:15 Nov-11-2013 .

Thanks, I appreciate it! A local company is hiring people like me; people that have the classes, but no experience. I was told, in January.....will continue networking...and hope for the best.

    
 
 Reply 
 
Albert
Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation, USA, Joined Jun 2012, 140

Albert

Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation,
USA,
Joined Jun 2012
140
05:02 Nov-12-2013
Re: employment
In Reply to Julie Anne Bourgeois at 23:51 Nov-11-2013 .

Search the internet

Try job websites, aerotek, Ive had a few calls from people I've connected with in Linkedin,

Heres a company with several ndt openings http://www.precast.com/

Heres a few in your state:
https://sjobs.brassring.com/1033/ASP/TG/cim_searchresults.asp?ref=11112013225719&SID=^cAn6Jm3VGXa7BAvtmNxTyD3gROYJaTu8MJ6HuGLHOUs4OKE9jnZkiQ==

Think casting, forging, oil fields, power generation and aerospace.

Keep at it, apply every where, even if you don't get the job, every interview is great practice.

Above all, remember, you haven't failed till you've given up

    
 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window