where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1052 views
Technical Discussions
Jose Rios
Jose Rios
07:50 Nov-10-1998
bimorph bender transducer

Dear experts,

to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

Thanks in advance.





 
 Reply 
 
Afshin Madinei
Afshin Madinei
09:13 Dec-23-1998
Re: bimorph bender transducer
: Dear experts,

: to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: Thanks in advance.





 
 Reply 
 
M. Simon
M. Simon
01:12 Feb-19-1999
Re: bimorph bender transducer



 
 Reply 
 
Rainer Meier
R & D
retired from intelligeNDT Systems & Services, Germany, Joined Nov 1998, 15

Rainer Meier

R & D
retired from intelligeNDT Systems & Services,
Germany,
Joined Nov 1998
15
01:05 Feb-26-1999
Re: bimorph bender transducer
: Dear experts,

: to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: Thanks in advance.


The properties of bender widely vary depending on the design (monomorph, bimorph, trimorph), driving
conditions and PZT material. Basic relations for example are given in the company paper
"Piecoelectric Ceramics", Philips Components, Eindhoven, The Netherlands (1991). A paper covering
the topic with 95 citations: Jan G. Smits et al., Sensors and Actuators A, 28 (1991) pp. 41 - 61.

Rainer Meier
on behalf of
Dr. Karl Lubitz
E-mail: Karl.Lubitz@mchp.siemens.de



 
 Reply 
 
k.rochdi
k.rochdi
03:08 Mar-16-1999
Re: bimorph bender transducer
: : Dear experts,

: : to develop a present application I would need design a bimorph bender tranduscer in parallel configuration. I believe that the response of such a transducer depends only on the dimensions (thickness, free length, clamped length, and width) of the bimorph as well as the piezoceramic material that compounds.

: : My question is how, or in other words what is the relation between the response of the bimorph (bending in cantilever configuration) (resonance frequency, bandwidth, displacement, voltage needed...) and its dimensions (T, FL, CL, W) and nature. How should be designed, starting from the response specifications, the dimensions and nature of the bender???

: : I would grateful any clues or references of books or web pages, journal articles... where it could be explained.

: : Thanks in advance.

:
: The properties of bender widely vary depending on the design (monomorph, bimorph, trimorph), driving
: conditions and PZT material. Basic relations for example are given in the company paper
: "Piecoelectric Ceramics", Philips Components, Eindhoven, The Netherlands (1991). A paper covering
: the topic with 95 citations: Jan G. Smits et al., Sensors and Actuators A, 28 (1991) pp. 41 - 61.

: Rainer Meier
: on behalf of
: Dr. Karl Lubitz
: E-mail: Karl.Lubitz@mchp.siemens.de




 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window