where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1387 views
Technical Discussions
P. Lunal
P. Lunal
03:59 Feb-28-2003
Defects manufacturer wanted - Can you make defects ?

Hi,
we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
If you know of companies that could help us please let us know their name and possible URL.
Thank you.
PL


 
 Reply 
 
John hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 74

John hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
74
04:17 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
Try TrueFlaw from Finland I think.

www.trueflaw.com

Rgds

John Hansen
www.hocking.com



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
04:28 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
In the UK, Sonaspection have pretty good capabilities
-Depends exactly what you need

http://www.sonaspection.co.uk

Good Luck
Joe


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
04:44 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
PL,

My company makes IGSCC/SCC type cracks in SS materials. We have a procedure for Carbon Steel too.

For regular flaws contact Sonaspcection.

J. Mark Davis
Davis NDE, Inc.
(205) 663-7006


Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.




 
 Reply 
 
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman Jr.

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
05:39 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
In addition to the two companies mentioned previously, you may try contacting FlawTech Inc. at www.flawtech.com.

Good Luck with your search.
Phil Herman Jr.
PH Tool Reference Standards

: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
Niklas Larsson
Niklas Larsson
08:31 Mar-03-2003
Re: Defects manufacturer wanted - Can you make defects ?
Uddcomb Engineering in Sweden is also an company that maybe can help you.
http://www.uddcomb.se/Pages/EngelskaPages/engelskaframestes/engframesetkraft.html

Regards
Niklas Larsson
SQC


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
Niklas Larsson
Niklas Larsson
08:31 Mar-03-2003
Re: Defects manufacturer wanted - Can you make defects ?
Uddcomb Engineering in Sweden is also an company that maybe can help you.
http://www.uddcomb.se/Pages/EngelskaPages/engelskaframestes/engframesetkraft.html

Regards
Niklas Larsson
SQC


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window