where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

VOGT Ultrasonics GmbH
non-destructive testing, services, training, ultrasonic systems, immersion and squirter inspection systems, PROline, digital radiology
356 views
Technical Discussions
Aziz U Rehman
R & D
Quaid-e-Azam University, Islamabad, Pakistan, Joined Apr 2001, 11

Aziz U Rehman

R & D
Quaid-e-Azam University, Islamabad,
Pakistan,
Joined Apr 2001
11
00:28 Mar-04-2003
A Problem in "KB's USM 3S"

Back Ground.
~~~~~~~~

In the High Voltage/Tension Card Sp 30085 - 3.220
a transformer is used to creates the high voltage for CRT of Upto 13 kV (Tr.1 30091 - 5.950).

From our experience from 9 out of 10 failures in that High Voltage/Tension Card in USM 3S, it is the transformer that fails.

Suggestion Needed:
~~~~~~~~~~~~~

I am sure that so many of this reputed forum are still using KB's USM 3S's for Ultrasonic NDE, and there will definitely be someone, who came across the same problem, i.e. the failure of the transformer (Tr.1 30091 - 5.950) on the High Voltage/Tension Card.

I hereby, request the representatives in this forum for a solution (if there is any) of the above mentioned problem.

May be re-designing of the Transformer,
re-designing of the High Power/Tension Card,

Or may be a supplier or a instrumentation company, still repairing those boards.


Aziz U. Rehman,
Supervisor NDT Tubular Products,
IPSCO Saskatchewan Inc.,
P.O. Box 1670, Regina S4P 3C7,
Saskachewan, Canada
Tel: (306) 924-7628
Fax: (306) 924-7380

arehman@ipsco.com



 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window