where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
1403 views
Technical Discussions
Protopappas
Protopappas
03:48 Mar-06-2003
Velocity of stainless steel 316 and plexiglass

Please,

could anyone provide me with the ultrasound velocity of the following materials:
steel 316
plexiglass
perspex (lucite)

I really cannot find accurate values.

Thank you in advance.


 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
00:44 Mar-07-2003
Re: Velocity of stainless steel 316 and plexiglass
: Please,
.
: could anyone provide me with the ultrasound velocity of the following materials:
: steel 316
: plexiglass
: perspex (lucite)
.
: I really cannot find accurate values.
.
: Thank you in advance.
.Here is some info. for you
Lucite Vlong 2680m/sec Vshear 1050m/sec
Plexiglass a)UVA Vlong 2760m/sec Vshear 1090m/sec
b)UVAII Vlong 2730m/sec Vshear 1080m/sec
Hope this helps
Regards



 
 Reply 
 
Uli Mletzko
R & D, Retired
Germany, Joined Nov 1998, 89

Uli Mletzko

R & D, Retired
Germany,
Joined Nov 1998
89
04:24 Mar-07-2003
Re: Velocity of stainless steel 316 and plexiglass

: could anyone provide me with the ultrasound velocity of the following materials:
: steel 316

The ultrasound velocity in stainless steel is strongly depending on the material (cast, forged, weld), especially on the grain size and the grain orientation, leading to anisotropy.
In general, the velocity is lower than in heat treated, forged, fine grain ferritic carbon steel (clong = 5920 m/s, ctrans =3250 m/s).
So, clong = 5800 m/s might be a suitable average value, but sometimes it can be also down to 5400 m/s.
You have to use suitable control specimens or you have calibrate on the test specimen directly.

Regards
Uli Mletzko
NDT Group, MPA
University of Stuttgart, Germany


 
 Reply 
 
Kris Smestad
Kris Smestad
06:46 Mar-14-2003
Re: Velocity of stainless steel 316 and plexiglass
: Please,
.
: could anyone provide me with the ultrasound velocity of the following materials:
: steel 316
: plexiglass
: perspex (lucite)
.
: I really cannot find accurate values.
.
: Thank you in advance.

Keep it simple. If you have a known thickness of a material, you can determine it's exact velocity. Measure a sample with a micrometer. Set your screen range on your A-scan to twice that thickness. After compensating for probe delay, adjust your velocity so you have one signal at 50% and one at 100%.

Easy, right?
.



 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window