where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

698 views
Technical Discussions
Hanurajie Baskan
Teacher, NDT Instructor
National Nuclear Energy Agency, Japan, Joined Oct 1999, 1

Hanurajie Baskan

Teacher, NDT Instructor
National Nuclear Energy Agency,
Japan,
Joined Oct 1999
1
08:44 Mar-13-2003
UT for thin material

Dear Everybody,
I'd like to ask to ndt forum about my new specimen TiNi (as actuator). What kind NDT method should I use for this one?. The thickness is 130 micro after rolling. Is there probability by ultrasonic, what kind method of UT?. I was trying by UT immersion 35 MHz focus tranducer, but really unsatisfied. Is there anybody can suggest to me.
Thank you in advance.
Best regard

Baskan


 
 Reply 
 
Kris Van de Rostyne
Kris Van de Rostyne
09:17 Mar-13-2003
Re: UT for thin material
Hello,
One possible solution to increase the bandwidth could be to use laser-ultrasonics. In this method, the ultrasonic waves are generated by the thermo-elastic expansion caused by the absorption of an incident laser pulse. The shorter the pulse-duration, the higher the bandwidth and resolution (but unfortunately, the higher the price I am afraid). For your application, a laser producing pulses of a few nanoseconds (e.g. Nd:YAG) should probably be convenient. Do you want to use UT for defect detection or for characterisation of properties?
Greetings,
Kris

: Dear Everybody,
: I'd like to ask to ndt forum about my new specimen TiNi (as actuator). What kind NDT method should I use for this one?. The thickness is 130 micro after rolling. Is there probability by ultrasonic, what kind method of UT?. I was trying by UT immersion 35 MHz focus tranducer, but really unsatisfied. Is there anybody can suggest to me.
: Thank you in advance.
: Best regard
.
: Baskan
.



 
 Reply 
 
C. Valdecantos
Engineering
MTORRES, Ing., Spain, Joined May 2001, 9

C. Valdecantos

Engineering
MTORRES, Ing.,
Spain,
Joined May 2001
9
01:56 Mar-13-2003
Re: UT for thin material
Depending on what are you looking for, some other ndt technique may be of use. For example, if the problem is to measure the thickness, Eddy Current may be the best, although this (Ti base?) alloy will probably show a very low conductivity. EC will also provide information (or even positive indication) on other parameters like cracks, inhomogeneities, laminar defects.

If EC is not suitable, perhaps thermografic analysis would be of use. In this case, the (supposed)low thermal conductivity of the material will help.


 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window